Schneider Electric 66846 Manual De Usuario

Network

Management Card

User Manual

Network Management Card

– User Manual

34003676EN/HA

Page

68/81

[2] 0.0.0.0          public                NotAccess
[3] 0.0.0.0          public                NotAccess
[4] 0.0.0.0          public                NotAccess

   COMMANDS -
   1. Modify - Modify an entry of table
   2. Reset - Reset an entry to default from table
   0. Return to previous menu

Please Enter Your Choice =>

This menu enables configuration of access to the four supervision stations (identified by the IP address) with
read/write community names different to those already defined in the card “1” menu.
First enter the figure corresponding to the command to be carried out, then the number of the target input.
The example below shows how to configure the read/write rights for a station (172.17.1.1) with a community
name MyCom:

Please Enter Your Choice => 1
Entry Number : 1
Enter IP address : [0.0.0.0] 172.172.1.1
Enter Community String : [public] MyCom
Select Access Type -
[NotAccess]
   1. Read
   2. Read/Write
   3. NotAccess

Please Enter Your Choice => 2
+============================================================================+
|   IP Address       Community String      Access                            |
+============================================================================+
[1] 172.172.1.1             MyCom                Read/Write

6.1.4 Choice 4: Restore default configuration

Use this function to restore the card’s factory configuration. Reboot the card so that the network parameter
changes are taken into account.

6.1.5 Choice 5: Reset the card

Use this function to reboot the card