Maxtor QSNDVR9M Manual De Usuario
![Maxtor](https://files.manualsbrain.com/attachments/56a4df9f4204e875d87bba2a1fa370e25b7b5a9c/common/fit/150/50/f5eec072d651c7843e562f5f1598920a52c4840f9b47fac011ac6482918d/brand_logo.jpeg)
[SETUP -RE C-E VENT(S/D)]
Fig3.2.18 Setup sensor detection
SENSOR DETECTION: Each channel matches a relevant Sensor, for example, Channel 2 is linked to
Sensor 4, if the Sensor 4 gives an alarm, the alarm information will be given on the picture by channel 2
(Fig 3.2.18 Setup sensor detection), the “□” means that the channel can not be detected, “V” means that the
channel can be detected.
(Fig 3.2.18 Setup sensor detection), the “□” means that the channel can not be detected, “V” means that the
channel can be detected.
OPTIONS: (Fig 3.2.19 Setup record time)
POST-RECORD TIME: The length of the recording time after alarm is triggered. You have five
options to choose: 10 seconds, 30 seconds, 1 minute, 5 minutes and 10 minutes.
PRE-RECORD TIME: The length of the recording time before alarm triggered. You have five options
Page 46