Vivitar ViviCam 3345 Manual De Usuario

 

 18

 

If any problems arise with the ViviCam 3345, refer to this troubleshooting chart: 

  

The battery is drained. 

Change or recharge the battery. Also, 
check for correct polarity (orientation) of 
the batteries. 

The camera doesn’t turn on. 

Power button must be pressed 
for 3 to four seconds 

Press and hold the Power button until 
“ON” appears in the status display 

Is the camera turned on? 

The camera powers off automatically after 
60 seconds. Make sure the camera’s 
power is ON before taking an image. 

Is the camera connected to a 
computer? 

The camera’s buttons are not functional 
when connected to a PC. Disconnect the 
camera to capture more images. 

The light condition is 
insufficient. 

Turn the flash mode to Flash ON. 

The camera won’t capture a 
image. 

The camera is processing. 

Wait for the camera to store files. The 
image number blinks at status LCD while 
the camera is processing and stops 
blinking when the camera is ready for use. 

I can’t download images to the 
PC. 

Connection may have failed. 

Check to ensure that all connections are 
secure. Look for Removable Disk under 
My Computer. 

I get a blurred image when 
downloading my images to my 
computer. 

There may be a momentary 
delay between pressing the 
shutter button and the actual 
exposure. 

Hold your ViviCam 3345 steady until you 
hear a “beep” which indicates the 
exposure is completed.