Philips 5000 series LED TV 55PFL5907 55PFL5907/F7 Manual De Usuario

English

13

 Initial setup

This section will guide you through the unit’s initial setting which 
includes selecting a language for your on-screen menu, country, location 
and AutoProgram, which automatically scans and memorizes viewable 
channels. You can also set the network connection in this setting.

Make sure the unit is connected to antenna or cable.

1 

After making all the necessary connections, press   to Turn On the 
unit.
•  It may take a few moments to Turn On the unit for the fi rst time.
•  Initial setup menu appears automatically after the unit is Turned 

On.

2 

Use ▲▼ to select the on-screen language, country, location on the 
right side of the TV screen, then press OK.
•  You must set Home in location setting. Otherwise, Picture and 

Sound settings you adjusted will not be memorized after the unit 

goes into Standby mode.

3 

Use ▲▼ to select the signal type.
•  If the TV is connected to a cable box or satellite set-top box, 

select the 2nd one and skip to step 5.

To set up a TV signal from a cable TV 

wall jack or a standard TV antenna.

 

Select

To set up a TV signal from a cable TV 

box or satellite TV receiver.

 

Select

4 

Use ▲▼ to select Antenna for TV channels or Cable for CATV 
channels, then press OK.

Make sure that you have 

attached your antenna or cable

signal into the jack on the back 

of your TV labeled “ANTENNA. IN”.

 

Now select either Antenna or

Cable, using up/down key of the

remote control. Once you have

made you selection, press the 

OK button to proceed.

 

Antenna

Cable

Skip

 

– When Antenna is selected, the TV detects antenna signals. It searches 

for DTV and Analog TV channels available in your area.

 

– When Cable is selected, the TV detects signals supplied by cable. It 

searches for DTV, Analog TV and Cable channels available in your 

area.

•  Autoprogram will begin.

System searching. Please wait...

Digital channels found:

0

Analog channels found:

0

Auto programming may take more than 20 minutes to 

complete. Digital channels will take longer than Analog 

to find and program. Please wait until you see 

the Auto Programming complete message.

 

Stop

5 

After the channel installation is completed, Network setup screen 
will appear. Use ▲▼ to select Wireless or Wired, then press OK.

This TV can be connected to 

your home network.

Select your connection type.

Wireless

Wired

Skip

Wireless

If you have a Wireless router, select Wireless to 

connect to the Internet.

Wired

If you connect with an Ethernet cable, select 

Wired to connect to the Internet.

•  If you have a router with WPS function, select Wireless and use 

▲▼ to select  Easy Connect, then press OK.

6 

Follow the on-screen instructions to complete the installation.
•  When you select On in the selection screen of 

Auto software update. A message will appear if there is the 

latest software on the network server.

7 

Use ◄► to select Start, then press OK to begin Settings assistant.

Settings assistant will allow you to customize your picture settings to your

personal preference. You will see a series of test pictures where

the right side and left side differ. Select the side that is most pleasing to

you with the Left/ Right buttons.

Cancel

Start

8 

Press ◄

 or ► 5 times to select the side of the pictures that is the 

most pleasing to you, then press OK.

Which side of the picture do you prefer?

Cancel

Picture A

Picture B