Omnitron iConverter GM3 8970P-0-D Manual De Usuario
Los códigos de productos
8970P-0-D
iConverter
iConverter
®
■ Network Interface Device for 1000Mbps and 100Mbps
Carrier Ethernet Fiber Access
■ 802.1ad VLAN stacking (Q-in-Q) for E-Line and E-LAN
service multiplexing
■ Smallest full-function NIDs available with the lowest
power consumption
■ Advanced traffic management with service mapping and
traffic policing and shaping
■ MEF 9, 14 and 21 Certified Compliant
■ MEF 30 and 31 Compliant
■ IEEE 802.1ag End-to-End Connectivity Fault
Management (CFM)
■ ITU-T Y.1731 End-to-End Performance Monitoring
■ Zero-Touch Provisioning
■ Granular Rate Limiting using Committed Information
Rate (CIR) and Committed Burst Size (CBS) per UNI,
EVC and CoS
■ Remote management through TELNET, SNMPv1/v2c/v3
and IP-less 802.3ah OAM extensions
■ SNMP management via Omnitron’s NetOutlook
®
Network
Management software
■ Fully integrated with Cyan CyPortal
®
■ Geo-diverse uplink redundancy (1:1) option
■ Supports 1000BASE-X and 100BASE-FX Small Form
Pluggable (SFP) transceivers for standard or CWDM
applications
■ Commercial (0 to 50ºC), wide (-40º to 60ºC) and
extended (-40º to 75º C) temperature ranges
iConverter
GM3 Network Interface Devices
Carrier-Grade NIDs for 1000Mbps and 100Mbps Ethernet Fiber Access
The
iConverter
GM3 is a flexible and cost-effective Network
Interface Device (NID) with Service and Link Operations,
Administration and Maintenance (OAM) capabilities. The
GM3 provides Carrier Ethernet service demarcation with rapid
service activation, SLA assurance and fault management.
The GM3 supports MEF-certified User-to-Network Interface
(UNI) functions including Class of Service (CoS) management,
granular rate-limiting, and 802.1ad Provider Bridge VLAN
stacking (Q-in-Q) for service multiplexing of multiple E-Line,
E-LAN and E-Tree services. The GM3 provides per-flow
service mapping, traffic policing and shaping. CIR/EIR “two
rates, three colors” ingress port policing provides granular
bandwidth optimization. The GM3 also provides advanced
classification and filtering of subscriber traffic as an EVC or
CoS flow based on layer 1, 2, 3 or 4 identifiers.
The GM3 supports carrier-class Ethernet Service OAM
standards. IEEE 802.1ag Connectivity Fault Management
(CFM) proactively monitors service availability and provides
tools for rapid fault isolation. ITU-T Y.1731 Performance
Monitoring provides the ability to monitor key SLA parameters
including frame delay, frame delay variation and frame loss.
These OAM features provide proactive fault detection and rapid
isolation of potential service problems, enabling SLA assurance
while reducing Operational costs (OPEX).
iConverter
GM3 NIDs provide industry-leading interoperability
with the most comprehensive 802.1ag and Y.1731 standards
implementations.
Zero-Touch Provisioning (ZTP) allows providers to achieve
efficiencies in service activation that accelerate turn up and
reduce the need for onsite technicians. ZTP allows service
provisioning to be centralized, standardized and remotely
managed.
The GM3 fiber ports support Gigabit (1000BASE-X) or Fast
Ethernet (100BASE-FX) SFP transceivers, and the copper
interface operates at 1000, 100 or 10Mbps. The GM3 is
available in 2-port or 3-port options. The 3-port configuration
supports geo-diverse redundant access links or multi-tenant
demarcation with two subscriber ports.
SFPs not included
KEY FEATURES