Philips Active 3D glasses PTA508 PTA508/00 Manual De Usuario
Los códigos de productos
PTA508/00
4
English
Active 3D glasses PTA508
What’s in the box
- 3D Max active glasses
- Microfiber pouch
- Manual
See the illustrations at the beginning of the
manual.
1 - A, On or Off switch
2 - Player 1/2, Player 1 or Player 2 selection
3 - Receiver lens
4 - Battery compartment
When you unpack the 3D glasses, also
remove the small plastic foil from the
battery compartment that prevents the
battery from running empty.
Switch on
Switch on your Philips TV and start a 3D
programme. When a 3D programme is
offered, press A on the 3D glasses and put
them on. The glasses need some seconds
to adjust to the 3D signal from the 3D
transmitter on the TV.
Make sure the receiver lens in the centre of
the glasses can receive the 3D signals.
Battery level
You can check the battery level when you
switch on the 3D glasses.
• If the LED light blinks green, you can use
the glasses for 4 hours or more.
• If the LED light blinks orange, you can
use the glasses for at least 2 hours but less
than 4.
• If the LED light blinks red, the battery is
almost empty and less than 2 hours of 3D
watching remain.
Switch off
To switch off the 3D glasses, press A.
The LED light blinks red 4 times. When the
3D glasses do not receive 3D signals for 2
minutes, the glasses switch off automatically.
3D transmitter
Make sure the receiver lens in the centre of
the glasses can receive the 3D signals. Also,
clear objects away from the 3D transmitter
on the TV.
Two-player gaming
You can use these glasses to play two-player
games. Two players can watch the same
TV but see two different screens to play
a game.
To switch the glasses to watch the Player 1
or Player 2 screen, switch on the glasses and
then press the Player 1/2 key.