Cisco 7513 AC PWR-7513-ACU= Manual De Usuario
Los códigos de productos
PWR-7513-ACU=
2 1200-Watt AC-Input Power Supply Replacement Instructions
Product Overview
Product Overview
The AC-input power supply is a modular power supply for the Cisco 7513 and Cisco 7576
multiprotocol, multimedia routers. A second power supply, if installed, provides redundant power.
Power supplies reside in power supply bays (labeled Power A and Power B) in the rear of the router
chassis, as shown in Figure 1.
multiprotocol, multimedia routers. A second power supply, if installed, provides redundant power.
Power supplies reside in power supply bays (labeled Power A and Power B) in the rear of the router
chassis, as shown in Figure 1.
Note
The Cisco 7513 and Cisco 7576 use the same chassis and power supplies. However, the
backplane and the interface processor slot numbering scheme on the card cages are different. The
interface processor slot numbering scheme of the Cisco 7513 is shown in Figure 1. The numbering
scheme has no effect on the location or installation of the power supplies.
interface processor slot numbering scheme of the Cisco 7513 is shown in Figure 1. The numbering
scheme has no effect on the location or installation of the power supplies.
Figure 1
Cisco 7513 and Cisco 7576 (Rear-Panel View)
Caution
To prevent problems with the Cisco 7513 and Cisco 7576, do not mix DC-input and AC-input
power supplies in the same chassis. Your Cisco 7513 or Cisco 7576 must have either DC-input or AC-input
power supplies.
power supplies.