ZyXEL SHDSL Router 791R 91-004-247008B Manual De Usuario
Los códigos de productos
91-004-247008B
Prestige 791R G.SHDSL Router
Figure 5-2 Advanced WAN Setup
Table 5-2 Advanced WAN Port Setup: AT Commands Fields
FIELD
DESCRIPTION
DEFAULT
AT Command
Strings:
Strings:
Dial Enter the AT Command string to make a call.
atdt
Drop Enter the AT Command string to drop a call. “~” represents a one
second wait, e.g., “~~~+++~~ath” can be used if your modem has a
slow response time.
slow response time.
+++ath
Answer Enter the AT Command string to answer a call.
ata
Drop DTR When
Hang Up
Hang Up
Press the [SPACE BAR] to choose either
Yes or No. When Yes
is selected (the default), the DTR (Data Terminal Ready) signal is
dropped after the “AT Command String: Drop” is sent out.
dropped after the “AT Command String: Drop” is sent out.
Yes
AT Response String:
CLID (Calling Line
Identification)
Enter the keyword that precedes the CLID (Calling Line Identification)
in the AT response string. This lets the Prestige capture the CLID in
the AT response string that comes from the WAN device. CLID is
required for CLID authentication.
in the AT response string. This lets the Prestige capture the CLID in
the AT response string that comes from the WAN device. CLID is
required for CLID authentication.
NMBR =
Called Id Enter the keyword preceding the dialed number.
TO
Menu 2.1 - Advanced WAN Setup
AT Command Strings: Call Control:
Dial= atdt Dial Timeout(sec)= 60
Dial= atdt Dial Timeout(sec)= 60
Drop= ~~+++~~ath Retry Count= 0
Answer= ata Retry Interval(sec)= N/A
Drop Timeout(sec)= 20
Drop DTR When Hang Up= Yes Call Back Delay(sec)= 15
AT Response Strings:
CLID= NMBR =
Called Id=
Speed= CONNECT
Press ENTER to Confirm or ESC to Cancel:
Dial Backup
5-3