ZyXEL Wireless Access Point G1000 91-005-124003B Manual De Usuario

G-1000 User’s Guide

Chapter 17 System Information and Diagnosis

121

Note: The console port is internal and reserved for technician use only.

You can set up different port speeds for the console port through Menu 24.2.2 – System 
Maintenance – Console Port Speed. Your G-1000 supports 9600 (default), 19200, 38400, 
57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select 
the desired speed in menu 24.2.2, as shown in the following figure.

After you changed the console port speed on your G-1000, you must also make the same 
change to the console port speed parameter of your communication software.

The diagnostic facility allows you to test the different aspects of your G-1000 to determine if it 
is working properly. Menu 24.4 allows you to choose among various types of diagnostic tests 
to evaluate your system, as shown in the following figure.

IP Mask

This shows the subnet mask of the G-1000.

DHCP

This field shows the DHCP setting of the G-1000. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC 

to cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Table 51   Menu 24.2.1 System Maintenance: Information

Menu 24.2.2 – System Maintenance – Change Console Port Speed

Console Port Speed: 9600

Press ENTER to Confirm or ESC to Cancel: