ZyXEL Wireless Access Point G1000 91-005-124003B Manual De Usuario

G-1000 User’s Guide

Chapter 18 Firmware and Configuration File Maintenance

127

The following table describes some of the commands that you may see in third party FTP 
clients.

The G-1000 supports the up/downloading of the firmware and the configuration file using 
TFTP (Trivial File Transfer Protocol) over LAN. Although TFTP should work over WAN as 
well, it is not recommended.

To use TFTP, your computer must have both telnet and TFTP clients. To backup the 
configuration file, follow the procedure shown next:

1 Use telnet from your computer to connect to the G-1000 and log in. Because TFTP does 

not have any security checks, the G-1000 records the IP address of the telnet client and 
accepts TFTP requests only from this address.

2 Put the SMT in command interpreter (CI) mode by entering 8 in Menu 24 – System 

Maintenance.

331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 327680 bytes sent in 1.10Seconds 
297.89Kbytes/sec.
ftp> quit

Table 54   General Commands for Third Party FTP Clients

Host Address

Enter the address of the host server.

Login Type

Anonymous. 
This is when a user I.D. and password is automatically supplied to the server for 

anonymous access. Anonymous logins will work only if your ISP or service 

administrator has enabled this option.
Normal.  
The server requires a unique User ID and Password to login.

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

Initial Remote 

Directory

Specify the default remote directory (path).

Initial Local Directory Specify the default local directory (path).