ZyXEL Wireless Access Point G1000 91-005-124003B Manual De Usuario
Los códigos de productos
91-005-124003B
G-1000 User’s Guide
26
Chapter 1 Getting to Know Your G-1000
C
H A P T E R
1
Getting to Know Your G-1000
This chapter introduces the main features and applications of the G-1000.
1.1 Introducing the G-1000
The G-1000 Access Point extends the range of your existing wired network without any
additional wiring efforts, providing easy network access to mobile users.
additional wiring efforts, providing easy network access to mobile users.
The G-1000 incorporates the IEEE802.11g standard for high-speed wireless transmission. In
line with the standard, your G-1000 is backward-compatible with IEEE802.1b-enabled
devices.
line with the standard, your G-1000 is backward-compatible with IEEE802.1b-enabled
devices.
Additionally, the G-1000 offers highly-secure wireless connectivity to your wired network
with IEEE 802.1x, WEP data encryption and MAC address filtering.
with IEEE 802.1x, WEP data encryption and MAC address filtering.
The G-1000 is easy to install and configure. The embedded web-based configurator enables
easy operation and configuration.
easy operation and configuration.
1.2 G-1000 Features
The following sections describe the features of the G-1000
1.2.1 Physical Features
1.2.1.1 10/100M Auto-negotiating Ethernet/Fast Ethernet Interface
This auto-negotiating feature allows the G-1000 to detect the speed of incoming transmissions
and adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps
or 100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network.
and adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps
or 100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network.
1.2.1.2 10/100M Auto-crossover Ethernet/Fast Ethernet Interface
An auto-crossover (auto-MDI/MDI-X) port automatically works with a straight-through or
crossover Ethernet cable.
crossover Ethernet cable.
1.2.1.3 Reset Button
The G-1000 reset button is built into the side panel. Use this button to restore the factory
default password to 1234; IP address to 192.168.1.2, subnet mask to 255.255.255.0.
default password to 1234; IP address to 192.168.1.2, subnet mask to 255.255.255.0.