ZyXEL Wireless Access Point G1000 91-005-124003B Manual De Usuario

G-1000 User’s Guide

Chapter 6 Wireless LAN

63

Figure 21   Wireless LAN: 802.1x/WPA for 802.1x Protocol

The following table describes the labels in this screen.

Table 17   Wireless LAN: 802.1x/WPA for 802.1x Protocol

Wireless Port 

Control

To control wireless stations access to the wired network, select a control method 

from the drop-down list box. Choose from No Authentication Required, 

Authentication Required and No Access Allowed. 
No Authentication Required allows all wireless stations access to the wired 

network without entering usernames and passwords. This is the default setting. 
Authentication Required means that all wireless stations have to enter 

usernames and passwords before access to the wired network is allowed. 
No Access Allowed blocks all wireless stations access to the wired network.
The following fields are only available when you select Authentication Required.

ReAuthentication 

Timer (In 

Seconds)

Specify how often wireless stations have to reenter usernames and passwords in 

order to stay connected. This field is activated only when you select 

Authentication Required in the Wireless Port Control field. 
Enter a time interval between 10 and 9999 seconds. The default time interval is 

1800 seconds (30 minutes). 

Note: If wireless station authentication is done using a RADIUS 
server, the reauthentication timer on the RADIUS server has 
priority. 

Idle Timeout            

(In Seconds)

The G-1000 automatically disconnects a wireless station from the wired network 

after a period of inactivity. The wireless station needs to enter the username and 

password again before access to the wired network is allowed. 
This field is activated only when you select Authentication Required in the 

Wireless Port Control field. The default time interval is 3600 seconds (or 1 hour).

Key Management 

Protocol

Choose 802.1x from the drop-down list.