ZyXEL Wireless Access Point G1000 91-005-124003B Manual De Usuario

G-1000 User’s Guide

72

Chapter 8 Remote Management Screens

This chapter provides information on the Remote Management screens. 

Remote management allows you to determine which services/protocols can access which G-
1000 interface (if any) from which computers.

You may manage your G-1000 from a remote location via:

To disable remote management of a service, select Disable in the corresponding Server 
Access field.

You may only have one remote management session running at a time. The G-1000 
automatically disconnects a remote management session of lower priority when another 
remote management session of higher priority starts. The priorities for the different types of 
remote management sessions are as follows.

1 Telnet

2 HTTP

Remote management over LAN or WAN will not work when:

1 A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, 

FTP or Web service. 

2 You have disabled that service in one of the remote management screens.

3 The IP address in the Secured Client IP field does not match the client IP address. If it 

does not match, the G-1000 will disconnect the session immediately.

4 There is already another remote management session with an equal or higher priority 

running. You may only have one remote management session running at one time.

•

WLAN only

•

ALL (LAN and WLAN)

•

LAN only

•

Neither (Disable).