IBM Flex System V7000 Storage Node 4939H49 Manual De Usuario
Los códigos de productos
4939H49
8068ch08-Storage Pools.fm
Draft Document for Review January 29, 2013 12:52 pm
298
IBM Flex System V7000 Storage Node Introduction and Implementation Guide
The Internal Storage window (Figure 8-3) gives an overview of the internal drives installed in
the IBM Flex System V7000 Storage Node storage system. Selecting All Internal in the
Drive Class Filter shows all the drives installed in the managed system, including attached
expansion enclosures. Alternatively, you can filter the drives by their type or class, for
example, you can choose to show only SAS, NL SAS, or SSD drives.
the IBM Flex System V7000 Storage Node storage system. Selecting All Internal in the
Drive Class Filter shows all the drives installed in the managed system, including attached
expansion enclosures. Alternatively, you can filter the drives by their type or class, for
example, you can choose to show only SAS, NL SAS, or SSD drives.
Figure 8-3 Internal Storage window
On the right side of the Internal Storage window, the internal disk drives of the selected type
are listed. By default, this additional information is listed along with it:
are listed. By default, this additional information is listed along with it:
��
Logical drive ID
��
Drive’s capacity
��
Current type of use (unused, candidate, member, spare, or failed)
��
Status (online, offline, and degraded)
��
MDisk’s name that the drive is a member of
��
Enclosure ID that it is installed in
��
Physical Drive Slot ID of the enclosure that it is installed in