HP DL385p 642135-001 Manual De Usuario

Los códigos de productos
642135-001
Descargar
Página de 58
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: Factory Integrated Models must start with a CTO Server.
NOTE: FIO indicates that this option is only available as a factory installable option.
NOTE: All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard drives
ordered with the server.
Step 1: Base Configuration (choose one of the following configurable models)
HP Models
HP ProLiant DL385p Gen8 8 SFF Configure-to-order Server
653203-B21
Factory Integrated Model ships with:
 
Drive Cage - 8-SFF Drive Bays available (See hard drives in Section 4 for options)
SID-Systems Insight Display Included
24 DIMM slots for RDIMM or LRDIMM memory installation
Smart Array P420i Controller w/ Zero Memory (ZM)
I/O slots - 3 Slots come standard:
Slot 1 - FL/FH x8 PCIe 2.0 (x16 connector)
Slot 2 - HL/FH x8 PCIe 2.0 (x8 connector)
Slot 3 - HL/FH x4 PCIe 2.0 (x8 connector)
Additional PCIe Slots may be added with the 2nd Riser Cage option.
System Fans - 4 standard (2 additional fans included with second processor)
Drive Cage - 8SFF (drive blanks installed dependent on number of drives ordered)
USB - 4 Rear, 2 Front, 2 Internal, 1 SD slot
HP iLO Management Engine (iLO4)
NOTE: Smart Array Cache options, Hard drives, Optical drives, Flexible NICs*, Power
Supply* and Rail/CMA Kits not included in the base configuration - choose these from
Steps 2, 3, or 4 below in Options section. Additional 8-SFF Drive option requires
additional HP Smart Array Controller.
* This is a required selection.
 
HP ProLiant DL385p Gen8 8 LFF Configure-to-order Server
669804-B21
Factory Integrated Model ships with:
 
Drive Cage - 8-LFF Drive Bays available (See hard drives in Section 4 for options)
Pop Out SID-Systems Insight Display Included
24 DIMM slots for RDIMM or LRDIMM memory installation
Smart Array P420i Controller w/ Zero Memory (ZM)
I/O slots - 3 Slots come standard:
Slot 1 - FL/FH x8 PCIe 2.0 (x16 connector)
Slot 2 - HL/FH x8 PCIe 2.0 (x8 connector)
Slot 3 - HL/FH x4 PCIe 2.0 (x8 connector)
Additional PCIe Slots may be added with the 2nd Riser Cage option.
System Fans - 4 standard (2 additional fans included with second processor)
Drive Cage - 8LFF (drive blanks installed dependent on number of drives ordered)
USB - 4 Rear, 2 Front, 2 Internal, 1 SD slot
HP iLO Management Engine (iLO4)
NOTE: Smart Array Cache options, Hard drives, Optical drives, Flexible NICs*, Power
 
QuickSpecs
HP ProLiant DL385p Generation 8 (Gen8)
Configuration Information - Factory Integrated Models
DA - 14329   North America — Version 13 — December 12, 2012
Page  27