HP DL385p 642137-001 Manual De Usuario

Upgradeable to 2 processors
Up to 24 DIMM slots available for higher memory capacities
FlexibleLOM connector for 1Gb or 10Gb networking options

8SFF (plus optional upgrade of 8SFF for up to 16SFF drives-requires second Smart Array) and other Models
with 8LFF, 12LFF, or 25SFF hard drive bays
Optional 3-slot PCIe 2.0 riser (x16, x8, x8)

NOTE: The second processor must be installed to take advantage of the optional 3-slot riser.

Redundant Power Supply
Optical Drive (available on 8SFF and 8LFF Models only)

HP iLO (Firmware: HP iLO 4)

NOTE: For more information, visit: 

Advanced ECC
Online Spare

One of the following
depending on Model

Type

HP SmartMemory

DDR3 Load Reduced (LRDIMM) and Registered (RDIMM)

DIMM Slots Available

24 (12 DIMM slots per processor/4 channels per processor/3 DIMMs per
channel)

Storage Centric Model

16GB (2x8GB) PC3-10600R (DDR3-1333) Registered DIMMS

Dedicated Workload Model 32GB (4x8GB) PC3-10600R (DDR3-1333) Registered DIMMS

Maximized Consolidation
Model

32GB (4x8GB) PC3-10600R (DDR3-1333) Registered DIMMS

Maximum Capacity
(LDIMM)

768GB (24 x 32GB LRDIMM @ 800MHz)

Maximum Capacity
(RDIMM)

128GB (8 slots x 16GB RDIMM @1600MHz)

NOTE: Requires 2nd processor installed

NOTE: HP memory from previous generation servers may not provide the same performance with the HP
ProLiant DL385p Gen8 Servers as HP SmartMemory will.
NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is
required. For additional information, please see the HP SmartMemory QuickSpecs at:

NOTE: If only one processor is installed, only half the DIMM slots are available.
NOTE: Depending on the memory configuration, the memory speed may run at 1600MHz, 1333MHz,
1066MHz or lower. Please see Memory Population Table or the Online Memory Configuration Tool at:

.

Standard Features

DA - 14329   North America — Version 13 — December 12, 2012

Page  3