HP DL560 G8 686785-001 Manual De Usuario

Dimensions (H x W x
D)
(with bezel)

SFF Drives: 3.44 x 17.54 x 29.50 in (8.73 x 44.55 x 74.93 cm)

Weight
(approximate)

Maximum
(all SFF hard drives,
power supply, and
processor installed)

61.00 lb (27.66 kg)

Input Requirements
(per power supply)

Rated Line Voltage

100 to 120 VAC
200 to 240 VAC

Rated Input Current

For 1200 W Power Supply:
10 A (at 100 VAC),
4.9 A (at 200 VAC)

Rated Input Frequency 50 to 60 Hz

Rated Input Power

For 1200 W Power Supply:
930 W (at 100 VAC),
1348 W (at 200 VAC)

Maximum

For 1200 W Power Supply:
3530 BTU/hr (at 100 VAC),
4600 BTU/hr (at 200 VAC)

Power Supply Output
(per power supply)

Rated Steady-State
Power

For 1200 W Power Supply:
800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)

Maximum Peak Power For 1200 W Power Supply:

800 W (at 100 VAC),
900 W (at 120 VAC),
1200 W (at 200 to 240 VAC)
For 750 W Power Supply:
750 W (at 100 to 120 VAC),
750 W (at 200 to 240 VAC)
For 460 W Power Supply:
460 W (at 100 to 120 VAC),
460 W (at 200 to 240 VAC)

Operating

10° to 35°C (50° to 95°F) at sea level with an altitude derating of
1.0°C per every 304.8 m (1.8°F per every 1000 ft) above sea
level to a maximum of 3048 m (10,000 ft), no direct sustained
sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The
upper limit may be limited by the type and number of options
installed.
System performance may be reduced if operating with a fan
fault or above 30°C (86°F).

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr
(36°F/hr).

Relative Humidity
(non-condensing)

Operating

10 to 90% relative humidity (Rh), 28°C (82.4°F) maximum wet
bulb temperature, non-condensing.

Non-operating

5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet
bulb temperature, non-condensing.

Technical Specifications

DA - 14395   North America — Version 8 — December 10, 2012

Page  44