HP 1830 20.7TB SAS B7D99A Manual De Usuario
Los códigos de productos
B7D99A
StoreEasy 1430 Storage
System Unit
Dimensions (H x W x D)
(with bezel)
(with bezel)
4 LFF
1.7 x 17.11 x 29.5 inches (4.32 x 43.46 x 75.0 cm)
Weight (approximate)
Maximum
(all hard drives, power
supply, and processor
installed)
(all hard drives, power
supply, and processor
installed)
4 LFF - 16.2/16.8 kg, 35.7/37.0 lb
Minimum
(one hard drive, power
supply, and processor
installed)
(one hard drive, power
supply, and processor
installed)
32 lb (14.51 kg)
Input Requirements
(per power supply)
(per power supply)
Rated Line Voltage
100 to 120 VAC
Rated Input Current
6 Amps (at 100VAC) to 3 Amps (at 200 VAC)
Rated Input Frequency
50 to 60 Hz
Power Supply Output
(per power supply)
(per power supply)
Rated Steady-State Power 350 W (at 100 to 120 VAC),
350 W (at 200 to 240 VAC)
Maximum Peak Power
400 W (at 100 to 120 VAC),
400 W (at 200 to 240 VAC)
400 W (at 200 to 240 VAC)
System Inlet
Temperature
Temperature
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be limited
by the type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
altitude derating of 1.0°C per every 304.8 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3048 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be limited
by the type and number of options installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
change is 20°C/hr (36°F/hr).
Relative Humidity
(non-condensing)
(non-condensing)
Operating
10% to 90% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
maximum wet bulb temperature, non-
condensing.
Non-operating
5% to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non-
condensing.
(101.7°F) maximum wet bulb temperature, non-
condensing.
Altitude
Operating
3048 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable altitude
change rate is 457 m/min (1500 ft/min).
change rate is 457 m/min (1500 ft/min).
Acoustic Noise
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions were
measured in accordance with ISO 7779 (ECMA 74) and declared in accordance
with ISO 9296 (ECMA 109).
QuickSpecs
HP StoreEasy 1000 Storage
Technical Specifications
DA - 14434 North America — Version 12 — April 11, 2014
Page 90