Code Corporation CRA-A107 Prospecto
Battery Life
Fuel Gauge Indicators
<10%
(Flashes Rapidly)
<25%
25-50%
50-75%
50-75%
75%+
Quad-Bay B5 Battery Charging Station
Quickstart Guide
Charging B5 Battery Cartridges
1. Plug the barrel side of the power supply into the
charger and plug the power adapter into the wall
outlet. If using a flat power supply cable, route the
cable through the channel on the left labeled with the
number 1. If using a round power supply cable, route
the cable through the channel on the right, labeled 2.
outlet. If using a flat power supply cable, route the
cable through the channel on the left labeled with the
number 1. If using a round power supply cable, route
the cable through the channel on the right, labeled 2.
(Figure 2)
Figure 1
Fuel Gauge LEDs
Charge Indicator LED
Quad-Bay B5 Battery Charging Station
Quickstart Guide
Charging B5 Battery Cartridges
www.codecorp.com
© 2013. Code Corporation. All Rights Reserved.
C008053_01_QuadBay_ChargingStation
Figure 3
Figure 4
Figure 1
2. Place the battery cartridges into the slots as shown in Figure 3. Each charging slot has a
corresponding Charge Indicator LED. When the battery cartridge is seated correctly, the Charge
Indicator LED will illuminate green, indicating that the battery cartridge is charging.
Indicator LED will illuminate green, indicating that the battery cartridge is charging.
Note: The Fuel Gauge LEDs on the battery cartridges will flash 4 seconds ON and 2 seconds OFF
while charging. Refer to the Fuel Gauge Indicator chart to determine the cartridge battery life
status. (Figure 4)
while charging. Refer to the Fuel Gauge Indicator chart to determine the cartridge battery life
status. (Figure 4)
1. Plug the barrel side of the power supply into the
charger and plug the power adapter into the wall
outlet. If using a flat power supply cable, route the
cable through the channel on the left labeled with the
number 1. If using a round power supply cable, route
the cable through the channel on the right, labeled 2.
(Figure 2)
outlet. If using a flat power supply cable, route the
cable through the channel on the left labeled with the
number 1. If using a round power supply cable, route
the cable through the channel on the right, labeled 2.
(Figure 2)
Battery Life
Fuel Gauge Indicators
<10%
(Flashes Rapidly)
<25%
25-50%
50-75%
50-75%
75%+
Fuel Gauge LEDs
Charge Indicator LED
Figure 3
Figure 4
2. Place the battery cartridges into the slots as shown in Figure 3. Each charging slot has a
corresponding Charge Indicator LED. When the battery cartridge is seated correctly, the Charge
Indicator LED will illuminate green, indicating that the battery cartridge is charging.
Indicator LED will illuminate green, indicating that the battery cartridge is charging.
Note: The Fuel Gauge LEDs on the battery cartridges will flash 4 seconds ON and 2 seconds OFF
while charging. Refer to the Fuel Gauge Indicator chart to determine the cartridge battery life
status. (Figure 4)
while charging. Refer to the Fuel Gauge Indicator chart to determine the cartridge battery life
status. (Figure 4)
Figure 2
Figure 2
www.codecorp.com
© 2013. Code Corporation. All Rights Reserved.
C008053_01_QuadBay_ChargingStation