Zebra HW46211 Manual De Usuario
13185L-002 Rev. A 1/24/06
110XiIIIPlus Maintenance Manual
Page 4-47
Maintenance
Section 4
Figure 4-27. Print Mechanism View with Rewind Platen Roller
8. Refer to
. Loosen but do not remove the set screws in the rewind platen
pulley assembly.
9. Remove the lower platen roller pulley.
10. Remove the small spacer and bearing.
11. Push the lower platen roller to the right.
12. Remove the C-clip and bearing.
13. Slide the platen roller as far to the left as possible to free the right end and remove
the roller.
Bearing
Platen Roller
Roller Adjust Plate
Mounting
Screws
C-Clip
Washers
Bearing
Rewind Platen
Pulley
Small Spacer
HEA
D
CLO
SED
OPE
N
Note • Do not remove the roller adjust plate unless it is damaged, twisted, or
bent. If the adjust plate is removed, the alignment is lost and an adjustment
procedure must be performed.
bent. If the adjust plate is removed, the alignment is lost and an adjustment
procedure must be performed.
Caution:
Never reuse the old bearings. Use only the new bearings that were provided with
the replacement platen roller.
the replacement platen roller.