Zebra HW46211 Manual De Usuario

Page 2-2

110XiIIIPlus Maintenance Manual

13185L-002 Rev. A 1/24/06

Section 2

Operations Overview

Report Damage

If you discover shipping damage:

•

Immediately notify the shipping company and file a damage report with them. 
Zebra Technologies is not responsible for any damage incurred during shipment 
of the equipment and will not repair this damage under warranty.

•

Keep the carton and all packing material for inspection.

•

Notify your authorized Zebra reseller.

Storage

If you are not placing the printer into operation immediately, repackage it using the 

original packing materials. The printer may be stored under the following conditions:

•

Temperature: –40° to 140° F (–40° to 60° C)

•

Relative humidity: 5% to 85% non-condensing

Media and Ribbon Requirements 

Because print quality is affected by media and ribbon, printing speeds, and printer 

operating modes, it is very important to run tests for your applications.

We strongly recommend using Zebra Technologies-brand supplies for continuous high-

quality printing. A wide range of paper, polypropylene, polyester, and vinyl stock has been 

specifically engineered to enhance the printing capabilities of the printer and to ensure 

against premature printhead wear.

•

Continuous roll media, fanfold media, or card stock with optional perforations and 
registration holes may be used.

•

Printhead life may be reduced by the abrasion of exposed paper fibers when using 
perforated media.

•

In Thermal Transfer Mode, use ribbon that is as wide as or wider than your media. 
If the ribbon is narrower than the media, areas of the printhead are unprotected 
and subject to premature wear. (When printing in Direct Thermal Mode, ribbon is 
not used and should not be loaded in the printer.)