Zebra HW46211 Manual De Usuario
13185L-002 Rev. A 1/24/06
110XiIIIPlus Maintenance Manual
Page 2-29
Operations Overview
Section 2
Press NEXT/SAVE to display EARLY WARNING MEDIA ENABLE/DISABLE.
Early Warning Media Enable/Disable
Set Early Warning: Press the right or left black oval key to display other choices.
This parameter enables the printer to provide early warnings when labels or ribbons are
running low or when the printhead needs to be cleaned.
To enable the Early Warning System, press SETUP/EXIT, then press
NEXT/SAVE. To select the Early Warning setting, scroll back until MEDIA ENABLED
is listed on the LCD and press NEXT/SAVE to access the media settings. Use the right or
left black oval key to select the setting, then press SETUP/EXIT and NEXT/SAVE to
save the setting. Repeat this process to set the early warning for ribbon or maintenance
(printhead cleaning).
When the printer detects it is running low with less than 15% of the remaining labels or
ribbons, the following message appears on the LCD:
WARNING MEDIA LOW or WARNING RIBBON LOW. If the alert function has been
enabled, an alert is also sent. When the printhead is opened and then closed after a media
or ribbon warning has been received, the LCD asks MEDIA REPLACED or
RIBBON REPLACED. Press the right black oval key (YES) to clear the warning and rest
the label counter.
Press NEXT/SAVE to display LABELS PER ROLL.
Default: Disabled
Selections: Disabled, Enabled
EARLY WARNING
MEDIA ENABLED
Note • When setting the early warning for maintenance, an additional setting
appears after the media setting that prompts the LCD to ask HEAD CLEAN.
Use the right black oval key to select YES and then press SETUP/EXIT and
NEXT/SAVE to reset the label counter.
appears after the media setting that prompts the LCD to ask HEAD CLEAN.
Use the right black oval key to select YES and then press SETUP/EXIT and
NEXT/SAVE to reset the label counter.
Note • Labels per roll and ribbon length need to be updated when beginning
use of the Early Warning System. The printer does not make any adjustments
when power is turned off (O) and on (l).
use of the Early Warning System. The printer does not make any adjustments
when power is turned off (O) and on (l).
If media is disabled, Label Per Roll and Ribbon Length will not be displayed.