Cisco SFP-H10GB-CU1M=-C Hoja De Datos
© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 9
Cisco SFP-10G-LRM
The Cisco 10GBASE-LRM Module supports link lengths of 220m on standard Fiber Distributed Data Interface
(FDDI) grade multimode fiber (MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2
fibers, the transmitter should be coupled through a mode conditioning patch cord. No mode conditioning patch
cord is required for applications over OM3 or OM4. For additional information on mode conditioning patch cord
requirements please see:
http://www.cisco.com/en/US/prod/collateral/modules/ps5455/product_bulletin_c25-
530836.html
.
The Cisco 10GBASE-LRM Module also supports link lengths of 300m on standard single-mode fiber (SMF,
G.652).
Cisco FET-10G
The Cisco FET-10G Fabric Extender Transceiver support link lengths up to 100m on laser-optimized OM3 or OM4
multimode fiber. It is supported on fabric links only from a Nexus 2000 to a Cisco parent switch. Note this product
is not orderable individually. For more information refer to Nexus 2000 datasheet:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps10110/data_sheet_c78-507093.html
.
Cisco SFP-10G-LR
The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard single-mode fiber
(SMF, G.652).
Cisco SFP-10G-LR-X
The Cisco SFP-10G-LR-X is a multirate 10GBASE-LR, 10GBASE-LW and OTU2/OTU2e module for extended
operating temperature range. It supports a link length of 10 kilometers on standard single-mode fiber
(SMF, G.652).
Cisco SFP-10G-ER
The Cisco 10GBASE-ER Module supports a link length of up to 40 kilometers on standard single-mode fiber
(SMF, G.652).
Cisco SFP-10G-ZR
The Cisco SFP-10G-ZR is a multirate 10GBASE-ZR, 10GBASE-ZW and OTU2/OTU2e module. It supports link
lengths of up to about 80 kilometers on standard single-mode fiber (SMF, G.652). This interface is not specified as
part of the 10 Gigabit Ethernet standard and is instead built according to Cisco specifications.
Cisco SFP+ Twinax Copper Cables
Cisco SFP+ Copper Twinax (Figure 2) direct-attach cables are suitable for very short distances and offer a cost-
effective way to connect within racks and across adjacent racks. Cisco offers passive Twinax cables in lengths of
1, 1.5, 2, 2.5, 3 and 5 meters, and active Twinax cables in lengths of 7 and 10 meters.