Omnitron iConverter x21 8843-1-AW Prospecto
Los códigos de productos
8843-1-AW
iConverter
iConverter
®
■ X.21 and RS-530* Serial to Fiber media converter
■ Auto-configuration of baud rates
■ DCE-sourced or terminal clock modes
■ Supports serial data rates up to 8.192Mbps
■ Included adapter cable used to provide desired serial
interface gender
■ Features Small Form Pluggable (SFP) transceivers or
ST, SC and LC fixed-fiber connectors
■ Supports multimode and single-mode dual-fiber and
single-mode single-fiber
■ Extends network distances up to 120km
■ Features local loop-back for easy testing of fiber and
serial interfaces
■ Management is available with the addition of a
management module to the chassis
■ SNMP management via NetOutlook
®
provides real-
time port and module information, remote parameter
configuration and trap notification
■ Modules are hot-swappable in 19-Module, 5-Module,
2-Module or 1-Module chassis
■ Tabletop or wall-mount standalone units
■ Lifetime Warranty and free 24/7 Technical Support
iConverter
X21
X.21 Serial to Fiber Media Converter
The iConverter X21 serial-to-fiber media converter supports
X.21 and RS-530 applications featuring several configuration
modes to enable connections with a wide variety of X.21 and
RS-530 devices.
The X21 supports demanding applications where security,
and performance are critical. The X21 provides the reliability
and connectivity features necessary for enterprise and military
applications, including controlling radar installations from
remote distances.
The X21 can auto-detect and configure itself to match the
baud rate of the connected device up to 8.192Mbps. The X21
supports standard DCE-sourced timing and terminal timing.
An adapter cable is included to accommodate different gender
connectors.
The X21 features local loop-back configuration to facilitate
quick link testing and installations.
Fixed-fiber connectors are available with multimode dual-fiber,
single-mode dual-fiber and single-mode single-fiber options.
They support ST, SC and LC connectors with distances up
to 5km over multimode fiber, 120km over single-mode fiber
and 40km over single-fiber. The Small Form Pluggable (SFP)
model supports a variety of transceiver types.
The iConverter X21 is available as a compact, unmanaged
standalone unit or as a chassis managed plug-in module.
The hot-swappable plug-in module can be mounted in a 19
or 5-Module chassis with any combination of redundant AC
and DC power supplies. It can also be mounted in a 2-Module
AC or DC powered chassis, or in a 1-Module chassis with AC
or DC power input.
As a standalone unit, the X21 is available as a tabletop or
wall-mount unit. The tabletop model can be DIN-rail mounted
using an optional DIN-rail mounting kit. Both the tabletop and
the wall-mount models are DC powered and are available with
an external AC/DC power adapter or a terminal connector for
DC power.
SFP not included
KEY FEATURES
*Supports RS-530 DCE and DTE co-directional timing, Tx and Rx data,
and two control lines.