Philips 4000 series LED TV 40PFL4908 40PFL4908/F7 Manual De Usuario

18

English

Initial setup

This section will guide you through the unit’s initial setting which includes 
selecting a language for your on-screen menu, country, location and 
AutoProgram, which automatically scans and memorizes viewable 
channels. You can also set the network connection in this setting.

Make sure the unit is connected to antenna or cable.

1

After making all the necessary connections, press   to Turn On the 
unit.
• It may take a few moments to Turn On the unit for the first time.
• Initial setup menu appears automatically after the unit is Turned 

On.

2

Use ▲▼ to select the on-screen language, country, TV placement, 
location on the right side of the TV screen, then press OK.
• You must set Home in location setting. Otherwise, Picture and 

Sound settings you adjusted will not be memorized after the unit 
goes into Standby mode.

3

Use ▲▼ to select the signal type.
• If the TV is connected to a cable box or satellite set-top box, 

select the 2nd one and skip to step 5.

4

Use ▲▼ to select Antenna for TV channels or Cable for CATV 
channels, then press OK.

–

When Antenna is selected, the TV detects antenna signals. It 
searches for DTV and Analog TV channels available in your area.

–

When Cable is selected, the TV detects signals supplied by cable. It 
searches for DTV, Analog TV and Cable channels available in your 
area.
• Autoprogram will begin.

5

After the channel installation is completed, Network setup screen 
will appear. Use ▲▼ to select Wireless or Wired, then press OK.

• If you have a router with WPS function, select Wireless and use 

▲▼ to select Easy Connect, then press OK.

6

Follow the on-screen instructions to complete the installation.
• When you select On in the selection screen of Auto software 

update. A message will appear if there is the latest software on 

the network server.

7

Use ◄► to select Start, then press OK to begin Settings assistant.

8

Press ◄ or ► 5 times to select the side of the pictures that is the 
most pleasing to you, then press OK.

To set up a TV signal from a cable TV 
wall jack or a standard TV antenna.
 

Select

To set up a TV signal from a cable TV 
box or satellite TV receiver.
 

Select

Antenna

Cable

Skip

Make sure that you have 
attached your antenna or cable 
signal into the jack on the back 
of your TV labeled "ANTENNA IN".

Now select either Antenna or 
Cable, using up/down key of the 
remote control. Once you

 have 

made your selection, press the 
OK button to proceed.

Wireless

If you have a Wireless router, select Wireless to connect 

to the Internet.

Wired

If you connect with an Ethernet cable, select Wired to 

connect to the Internet.

System searching. Please wait...

Digital channels found:

0

Analog channels found:

0

Auto programming may take more than 20 minutes to 
complete. Digital channels will take longer than Analog 
to find and program. Please wait until you see 
the Auto Programming complete message.
 

Stop

This TV can be connected to 
your home network.
Select your connection type.

Wireless

Wired

Skip

Cancel

Start

Settings assistant will allow you to customize your picture settings to your personal 
preference. You will see a series of test pictures where the right side and left side 
differ. Select the side that is most pleasing to you with the Left/ Right buttons.
The energy consumption in the “Standard” setting is Energy Star certified.

Which side of the picture do you prefer?

Cancel

Picture A

Picture B