Phihong POE21-120H Prospecto
INPUT:
Unit receives power from Phihong PoE Plus
Midspans only using Cat 5e or Cat 6 wiring up to
100 meters per IEEE802.3. For information on PoE
Plus Midspans please go to www.midspans.com
Midspans only using Cat 5e or Cat 6 wiring up to
100 meters per IEEE802.3. For information on PoE
Plus Midspans please go to www.midspans.com
DC Input Current
0.7A (DC) and 45VDC at maximum load
DC Input Voltage Rating
45 – 57VDC for 12V
DC OUTPUT:
Regulation
Line and Load ±2%
Ripple
120mV maximum at 25
o
C
Efficiency
75% minimum at maximum load, 48V input
O/P Voltage Protection
In case of output over voltage overload, crowbar
will short. The output can be shorted permanently
without damage.
will short. The output can be shorted permanently
without damage.
ENVIRONMENTAL:
Temperature
Operation
0 to +40°C
Non-operation
-20 to +65°C
Humidity
Operation
5 to 90%
Immunity
ESD:
EN61000-4-2. Level 3
RS:
EN61000-4-3. Level 2
Note: RS and ESD tested with POE36U-1AT
EMC
EN55022 Class A
FCC Part 15, Class A
FCC Part 15, Class A
Dielectric withstand (HI-POT) Test
Primary to secondary: 2121VDC for 1 minute, 10mA
Primary to secondary: 2121VDC for 1 minute, 10mA
Insulation Resistance
Primary to Secondary: >10M Ohm 500V DC
Indicators
GREEN LED – Output power “ON”
Warranty
1 Year
Input and Output Data Connector
RJ45
Output Connector
POE and data RJ45 Jack
DC Output
Center Positive Barrel 12mm x 2.1mm ID x 5.5mm OD
Tip is user changeable for other sizes
POE21-120H Characteristics
WWW.PHIHONG.COM
Dimension Diagram Unit: mm