Cisco CAB-DSU-RJ45= Manual De Usuario
The cabling specifications for the Cisco 1602−R are as follows:
Console
The console cable is an RJ−45, the CAB−1600−CON=.
Ethernet Interface
On the 1602−R router, there is one functional port for either the 10Base−T (RJ−45)or the AUI (DB−15). The
cable details are: CAB−ETH−S−RJ45= Yellow cable for Ethernet, Straight−through, RJ−45, 6 ft.
cable details are: CAB−ETH−S−RJ45= Yellow cable for Ethernet, Straight−through, RJ−45, 6 ft.
Serial Interface
The Serial interface is a 56 K, 4−wire data service unit/channel service unit (DSU/CSU) for an RJ−45 cable.
The telco RJ45 designation is the same as the RJ−48S.
The telco RJ45 designation is the same as the RJ−48S.
The cable details are: CAB−DSU−RJ45= Blue Color Cable for DSU/CSU, RJ−45, 6 ft.
The table below lists the pin layout of the 56−kbps DSU/CSU (RJ−45) cable and its descriptions.
8 Pin
1
Description
1
Transmit
2
Transmit
7
Receive
8
Receive
1
Pins 3, 4, 5, and 6 are not used.
WAN Interface Cards (WICs)
WAN interface cards supported on the Cisco 1602−R consist of the following:
WIC−1T: 1−port serial, aynchronous and synchronous (T1/E1)
•
WIC−1DSU−56K4: One serial with integrated 56/64 Kbps 4−wire DSU/CSU
•
WIC−1DSU−T1: One serial with integrated T1/Fractional T1 DSU/CSU
•
WIC−1B−S/T: One ISDN BRI S/T
•
WIC−1B−U: One ISDN BRI U with integrated NT−1
•
Front Panel LEDs