Cisco CWDM 1510 nm SFP Gigabit Ethernet & 1G/2G FC CWDM-SFP-1510= Manual De Usuario

Los códigos de productos
CWDM-SFP-1510=
Descargar
Página de 14
4
Cisco CWDM GBIC and CWDM SFP Installation Note
78-15222-02
  Installing and Removing CWDM GBICs and CWDM SFPs
Installing and Removing CWDM GBICs and CWDM SFPs
This section describes how to install and remove CWDM GBICs and CWDM SFPs. This section also 
contains guidelines for handling the CWDM GBICs and CWDM SFPs. This section contains the 
following topics:
Laser Safety
CWDM GBICs and CWDM SFPs are equipped with a Class 1 laser, which emits invisible radiation. Do 
not stare into open optical ports. The following laser warnings apply to CWDM GBICs and CWDM 
SFPs.
Warning
Class 1 laser product.
Warning
Because invisible laser radiation may be emitted from the aperture of the port when no fiber is 
connected, avoid exposure to laser radiation and do not stare into open apertures.
Warning
Only trained and qualified personnel should be allowed to install or replace this equipment.
Guidelines for Handling GBICs and SFPs
Follow these guidelines when working with GBICs and SFPs:
CWDM GBICs and CWDM SFP modules are static sensitive. To prevent ESD damage, wear an 
ESD-preventive wrist strap that is connected to the chassis.
CWDM GBICs and CWDM SFP modules are dust sensitive. Always store the devices with plugs 
installed in the optical bores.
Do not remove and insert a CWDM GBIC or CWDM SFP module more often than is necessary. 
Repeated romovals and insertions of a CWDM GBIC or a CWDM SFP module can shorten its useful 
life.