Philips Micro music system BTM5000 BTM5000/12 Manual De Usuario
Los códigos de productos
BTM5000/12
9
EN
Set clock
Note
•
You can set the clock in standby mode only.
1
In standby mode, press and hold CLOCK
SET on the remote control to activate the
clock setting mode.
»
[CLOCK SET] (clock set) is displayed
briefly.
»
The 12 hour or 24 hour format is
displayed.
2
Press PRESET/ALBUM / to select 12
hour or 24 hour format.
3
Press CLOCK SET to confirm.
»
The hour digits begin to blink.
4
Press PRESET/ALBUM / to set the
hour.
5
Press CLOCK SET to confirm.
»
The minute digits begin to blink.
6
Press PRESET/ALBUM / to set the
minute.
7
Press CLOCK SET to confirm.
Note
•
You can also press VOL -/+ on remote control, or
/ , VOLUME on the main unit to set hour format/
hour/minute.
•
To exit clock setting mode without storing, press
/MENU.
•
If no button is pressed in 90 seconds, the system exits
clock setting mode automatically.
Turn on
• Press .
»
The unit switches to the last selected
source.
Switch to standby
• Press again to switch the unit to standby
mode.
»
The clock (if set) appears on the
display panel.
Switch to ECO Power mode:
• Press and hold for more than three
seconds.
»
[ECOPOWER] (Eco Power) is
displayed briefly.
Tip
•
The unit switches to Eco Power mode after 15 minutes
in standby mode.
Switch between standby mode and Eco Power
mode:
• In standby/Eco Power mode, press and
hold to switch the unit to Eco Power/
standby mode.
Demonstrate the unit's
features
• In standby mode, press /MENU until
[WELCOME TO PHILIPS] (welcome to
Philips) scrolls from the right to the left on
the display, and then [DEMO ON] (demo
on) is displayed briefly.
»
This system's features are displayed
one by one.
• To turn off the demonstration, press
/MENU again.