LevelOne 6 GE + 2 SFP Unmanaged Switch -20 ~ 60C, DIN-rail IES-0823-v1 Prospecto
Los códigos de productos
IES-0823-v1
Overview
LevelOne IES-0823 Industry Ethernet Switch provides 6 ports of Gigabit
Ethernet plus 2 1000Base SFP slots to enable high speed network at
mission-critical environment. This device is designed to be mounted on
an industry standard DIN-rail, plus the clearly visible status LEDs provide
simple monitoring of port link activity. Moreover, the SFP slots support
pluggable modules that enabling you to choose from a variety of
transceivers.
High Reliability
All components are built to withstand harsh environment applications
without compromise where humidity, temperature variation and even
shock vibration are concerns, including Electric & Utility, Critical
Infrastructure, Transportation and Surveillance Security. This device
operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.
Features
- Provides 6 10/100/1000Base-T ports and 2 SFP ports
- Gigabit combo port can choose to use either 1000BASE-SX/LX/SFP
interface or 10/100/1000BASE-TX interface
- Supports 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,
Auto-Negotiation, Auto-MDI/MDIX
- Supports jumbo frame up to 9KB
- Redundant power inputs (12 - 32VDC) with Terminal Block and DC Jack
(12VDC)
- Alarms for power failure by relay output
- -20°C to 60°C (-4°F to 140°F) and is tested for functional operation
@-30°C to 70°C (-22°F to 158°F).
- Provides DIN-rail or panel mounting
- Complies with IEC61000-6-2 EMC Generic standard immunity for
Industrial environment
Safety
This device has been tested under UL508 standard for Industrial Control
Equipment to endurance under test turn on and off 6,000 times while
loaded, with no single failure. It’s highly reliability and safety
measurement to ensure field hardened, especially for the harsh
environment.
Plug & Play
This unmanaged Industrial Ethernet Switch is designed for the
demanding industrial environments at businesses in need of instant
connectivity with no setup or configure required, truly plug and play.
Redundancy
This redundant power system is designed to meet the challenge of
power failure to ensure reliability and constant availability. Single power
design works fine in non-critical network applications, but it falls short
drastically for network applications in transportation, automate
production or banking.
Reliability
Rugged IP30 rated aluminium housing is designed for industrial
applications. With protection against ingress of dirt and solid metal
housing to ensure a long-last operating life under harsh environments
IES-0823
Diagrams
6 GE + 2 SFP Unmanaged Switch -20 to 60C, DIN-rail
Unit: mm
Side
Top/Buttom
Back
Front
A
3/
V
2
1
C
D
110
68
13
5