Philips 1190XD/44 Manual De Usuario

19

18

 

  Connect the small plug to the Jet Clean 

System.  Connect the charging plug into 

any 100V to 240V AC outlet.  Use only the 

power cord provided.

The razor holder automatically moves up to the 

highest position.

C

 

  Remove protective cap from razor. 

NOTE: The razor cannot be placed in the Jet 

Clean System when the trimmer or protective 

cap is placed on the razor.  

 

C 

  Place the razor head side down in the 

razor holder with the display facing the 

front of the Jet Clean System. 

 

C

 

  Place the razor into the holder behind the 

two clips (1) and press the razor down to 

lock it into place (2).

 

  The display on the razor will indicate razor 

is charging.

 

 

   Charging requires one full hour. A fully 

charged razor has a cordless shaving 

time of up to 50 minutes (Models 1190X, 

1180X, 1180XCC, 1160X and 1160XCC) 

or 40 minutes (Model 1150X). 

 

  Recharging requires one full hour. 

Recharge when the bottom charging light 

blinks orange (models 1190X, 1180X, 

1180XCC) or the plug symbol blinks 

(models 1160X, 1160XCC and 1150X).

When batteries are totally depleted, recharging 

the razor for approximately 3-5 minutes gives 

enough energy for a 3-minute cordless shave.

 

◗

  21 Day Trial and Conversion Process. It is a fact 

that your skin and beard need time to adjust to 

a new shaving system.

 

◗

    Use your new razor exclusively for 3 weeks to 

fully enjoy the closeness of a Philips Norelco 

shave.

 

◗

  At first you may not get as close a shave as you  

expect, or your face may even become slightly  

irritated. This is normal since your beard and 

  

skin will need time to adjust. Invest 3 weeks 

and you’ll soon experience the full joy of your 

new razor.

 

◗

  Stick with it! If you alternate shaving methods 

during the adjustment period, it may make it 

more difficult to adapt to the Philips Norelco 

shaving system.

1

2