Philips Food processor HR7627/01 HR7627/01 Manual De Usuario

Los códigos de productos

HR7627/01

HR7627

HR7628

HR7629

www.philips.com/welcome

Specifications are subject to change without notice

4 min

1 kg

20 sec

500 g

30 sec

500 g

30 sec

200 g

30 sec

2 pcs

30 sec

500 g

(HR7629)

1 min

1 L

1 min

1 L

1 min

1 L

P x 9

(HR7628, HR7629)

6 x

(MAX)

5 x 1 sec

500 g

5 x 1 sec 500 g

P/2

30 sec

50 g

60 sec

250 g

45 sec

250 g

30 sec

200 g

2-3 min

500 g

360 ml

350 ml

4 pcs

30 sec

500 g

30 sec

500 g

(HR7627, HR7628)

60-180 sec

30 sec

300 g

400 g

3 min

600 ml

30 sec

2 pcs

Brukerhåndbok

Manual do utilizador

SV Användarhandbok
TR

Kullanım kılavuzu

User manual

DA Brugervejledning
EL

Εγχειρίδιο χρήσης

Manual del usuario

FI Käyttöopas

1/3

English

1 Important

Congratulations on your purchase and welcome to Philips! To fully benefit from the support

that Philips offers, register your product at www.philips.com/welcome.
Read this user manual carefully before you use the appliance, and save the user manual for

future reference.

Danger

•

Do not immerse the motor unit in water nor rinse

it under the tap.

Warning

•

Never use your fingers or an object to push

ingredients into the feeding tube while the appliance

is running. Only use the pusher.

•

Before you connect the appliance to the power,

make sure that the voltage indicated on the bottom

of the appliance corresponds to the local power

voltage.

•

Never connect this appliance to a timer switch, to

avoid a hazardous situation.

•

Do not use the appliance if the power cord, the

plug, protecting cover, rotating sieve or any other

parts are damaged or has visible cracks.

•

If the power cord is damaged, you must have it

replaced by Philips, a service center authorized

by Philips, or similarly qualified persons to avoid a

hazard.

•

This appliance shall not be used by children. Keep

the appliance and its cord out of reach of children.

•

This appliance can be used by persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and if they understand the

hazards involved.

•

For their safety, do not allow children to play with

the appliance.

•

Never let the appliance run unattended.

•

If food sticks to the wall of the blender jar or bowl,

switch off the appliance and unplug it. Then use a

spatula to remove the food from the wall.

•

Be careful when you are emptying the bowl, handle

or clean the discs, the blade units and the juicer

sieve. The cutting edges are very sharp.

•

Do not touch the blades, especially when the

appliance is plugged in. The blades are very sharp.

•

If the blades get stuck, unplug the appliance before

you remove the ingredients that block the blades.

•

Be careful if hot liquid is poured into the food

processor or blender as it can be ejected out of the

appliance due to a sudden steaming.

•

This appliance is intended for household use only.

Caution

•

Never switch off the appliance by turning the

blender jar, the bowl, or their lids. Always switch off

the appliance by turning the speed selector to 0 or

OFF.

•

Unplug the appliance immediately after use.

•

Always wait until the moving parts stop running,

then switch off and unplug the appliance before

opening the lid and reaching into any of the parts

that move in use.

•

Always switch off and unplug the appliance if it is left

unattended, and before assembling, disassembling,

cleaning and changing accessories, or approaching

parts that move in use.

•

Thoroughly clean the parts that come into contact

with food before you use the appliance for the first

time. Refer to the instructions and table for cleaning

given in this manual.

•

Never use any accessories or parts from other

manufacturers that Philips does not specifically

recommend. If you use such accessories or parts,

your guarantee becomes invalid.

•

Do not exceed the maximum level indication on

the bowl or the jar. Follow the quantities, processing

time and speed as indicated in the user manual.

•

Let hot ingredients cool down (< 80ºC) before

processing them.

•

Always let the appliance cool down to room

temperature after each batch that you process.

•

Certain ingredients such as carrots may cause

discolorations on the surface of the parts. This

does not have a negative effect on the parts. The

discolorations usually disappear after some time.

•

Noise level: Lc = 85 dB [A]

Electromagnetic fields (EMF)

This Philips appliance complies with all applicable standards and regulations regarding

exposure to electromagnetic fields (EMF). If handled properly and according to the

instructions in this user manual, the appliance is safe to use based on scientific evidence

available today.

Recycling

Your product is designed and manufactured with high quality materials and

components, which can be recycled and reused.
When you see the crossed-out wheel bin symbol attached to a product, it means

the product is covered by the European Directive 2002/96/EC:
Never dispose of your product with other household waste. Please inform yourself

about the local rules on the separate collection of electrical and electronic products.

The correct disposal of your old product helps prevent potentially negative

consequences on the environment and human health.

2 Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support

that Philips offers, register your product at www.philips.com/welcome.
This appliance is equipped with a built-in safety lock. You can only switch on the appliance

after you correctly assemble the following parts on the motor unit:

• the food processor bowl and its lid, or

• the blender jar and its lid (HR7628, HR7629 only), or

• the citrus press (HR7629 only)

If these parts are assembled correctly, the built-in safety lock is unlocked.
For recipes to use with your food processor, go to www.philips.com/kitchen

3 Food processor

Warning

• Never use your fingers or an object to push ingredients into the feeding tube while the appliance is

running. Only use the pusher.

Blade unit

Before you start, make sure you assemble according to Fig. 2.
You can use the blade unit to chop, mix, blend, or puree ingredients. You can also use it to

mix and blend cake batters.

Caution

• Do not use the blade unit to chop hard ingredients, like coffee beans, turmeric, nutmeg, and ice

cubes, as this may cause the blade to get blunt.

Note

• Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise these

ingredients become too hot, start to melt, and turn lumpy.

• Precut large pieces of food into pieces of approx. 3 x 3 x 3 cm.

Turn the the bowl clockwise to fix it on the motor unit, and then put the tool holder in

the bowl.

When the bowl is fixed correctly, you hear a click.

Put the blade unit on the tool holder.

Put the ingredients in the bowl.

Put the lid on the bowl, and then turn the lid clockwise to fix it.

When the lid is assembled correctly, you hear a click and the lid is fixed to the bowl

handle.

Put the pusher into the feeding tube.

Connect the power plug to the power supply.

Check the preparation time, the maximum amount and the speed setting required for

the ingredients in Table 1. Turn the knob to the desired speed setting.

After use, turn the knob to 0, and then unplug the appliance.

Tip

• When you chop onions, turn the knob to P a few times to prevent the onions from becoming too

finely chopped.

• How to remove food that sticks to the blade or to the inside of the bowl? 1. Switch off the appliance,

and then unplug it. 2. Remove the lid from the bowl. 3. Remove the ingredients from the blade or

from the side of the bowl with a spatula.

Kneading accessory

Before you start, make sure you assemble according to Fig. 3.
You can use the kneading accessory to knead yeast dough for bread and pizzas. You need to adjust

the amount of liquid to form the dough according to the humidity and temperature condition.

Note

• Do not use the kneading accessory to blend cake batters. Use the blade unit for this job.

• Always put the kneading accessory in the bowl before you add the ingredients.

Turn the the bowl clockwise to fix it on the motor unit, and then put the tool holder in

the bowl.

When the bowl is fixed correctly, you hear a click.

Put the kneading accessory on the tool holder.

Put the ingredients in the bowl.

Put the lid on the bowl, and then turn the lid clockwise to fix it.

When the lid is assembled correctly, you hear a click and the lid is fixed to the bowl

handle.

Put the pusher into the feeding tube.

Connect the power plug to the power supply.

Turn the knob to the 1 position.

Check the preparation time, the maximum amount and the speed setting required for

the ingredients in Table 1.

After use, turn the knob to 0, and then unplug the appliance.

Discs and Inserts

Before you start, make sure you pick your desired disc from following and assemble

according to Fig. 4 and Fig. 5.
•

Emulsifying disc

•

Insert for fine (HR7627 and HR7628 only)

•

Insert for granulating (HR7627 and HR7628 only)

•

Reversible slicing / shredding disc (coarse) (HR7629 only)

Caution

• Be careful when you handle the slicing blade of disc. It has a very sharp cutting edge.

• Never use the disc to process hard ingredients, like ice cubes.

• Do not exert too much pressure on the pusher when you press ingredients into the feed tube.

Note

• Precut large ingredients into chunks that fit in the feeding tube.

Turn the bowl clockwise to fix it on the motor unit, and then put the tool holder in the

bowl.

When the bowl is fixed correctly, you hear a click.

Put the disc on the shaft. For inserts (HR7627 and HR7628 only), place an insert in the

insert holder as indicated below, then place the insert holder with insert on the shaft.

Place the opening of the insert over the shaft of the insert holder.

Push the opening of the insert over the projection on the shaft.

Press the insert onto the insert holder until it locks in position with a click.

Put the lid on the bowl, and then turn the lid clockwise to fix it.

When the lid is assembled correctly, you hear a click and the lid is fixed to the bowl

handle.

Put the ingredients into the feeding tube with the pusher. Fill the feeding tube evenly for

the best results. When you have to process a large amount of ingredients, process small

batches and empty the bowl between batches.

Connect the power plug to the power supply.

Check the preparation time, the maximum amount and the speed setting required for

the ingredients in Table 1. Select the speed that matches the color of the accessory.

After use, turn the speed selector to 0, and then unplug the appliance.

Citrus press (HR7629 only)

Before you start, make sure you assemble according to Fig. 6.
You can use the citrus press to squeeze citrus fruits.

Turn the the bowl clockwise to fix it on the motor unit, and then put the tool holder in

the bowl.

When the bowl is fixed correctly, you can hear a click .

Put the sieve for citrus press on the tool holder in the bowl. Make sure that the

projection on the sieve is locked in the slot of the bowl handle.

When the sieve is fixed correctly, you can hear a click .

Put the cone on the sieve.

Connect the power plug to the power supply.

Check the maximum amount required for the ingredients in Table 1. Turn the knob to

speed 1.

The cone starts rotating.

Press the citrus fruit onto the cone.

Stop pressing from time to time to remove the pulp from the sieve. When you finish

pressing or when you want to remove the pulp, turn the knob to 0 and remove the bowl

from the appliance with the sieve and cone on it.

Blender (HR7628 and HR7629 only)

Before you start, make sure you assemble according to Fig. 7.
The blender is intended for:
•

Blending fluids, like dairy products, sauces, fruit juices, soups, mixed drinks, and shakes.

•

Mixing soft ingredients, like pancake batter.

•

Pureeing cooked ingredients, like baby food.

•

Crushing ice.

Note

• Do not exert too much pressure on the handle of the blender jar.

• Never open the lid to put your hand or any object in the jar while the blender is running.

• Always assemble the sealing ring onto the blade unit before you attach the blade unit to the blender jar.

• To add liquid ingredients during processing, pour them into the blender jar through the feeding hole.

• Precut solid ingredients into small pieces before you process them.

• If you want to prepare a large quantity, process small batches of ingredients instead of a large

quantity at once.

• To avoid spillage: When you process a liquid that is hot or tends to foam (for example, milk), do not

put more than 1 liter of liquid in the blender jar.

• If you are not satisfied with the result, switch off the appliance and stir the ingredients with a spatula.

Remove some of the contents to process a smaller quantity or add some liquid.

Turn the blade unit on the blender jar.

Place the blender jar on the motor unit and turn it clockwise to fix it.

When the jar is fixed correctly, you hear a click.

Put the ingredients in the blender jar within the maximum level indication.

Place the lid on the blender jar, and then turn it clockwise to fix it.

Connect the power plug to the power supply.

Check the preparation time, the maximum amount and the speed setting required for

the ingredients in Table 1. Turn the knob to the desired speed setting. To crush ice, turn

the knob to P. Press the button again to stop.

3140 035 30322