Teldat bintec R3002 5510000263 Manual De Usuario
Los códigos de productos
5510000263
bintec R3002
29.10.2013
Subject to technical alterations
Page 2 / 11
Teldat GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - 911 9673-0 - Telefax: +49 - 911 688 07 25
E-Mail: info@teldat.de - www.teldat.org
The VPN gateway with ADSL 2+ modem
The flexible R3002 VPN gateway with its ADSL 2+ modem supporting both Annex A and B is
suitable for use around the globe, in both SMEs and medium-sized corporate headquarters.
suitable for use around the globe, in both SMEs and medium-sized corporate headquarters.
The bintec R3002 is a powerful and, thanks to its comprehensive equipment, flexible VPN
gateway. The integrated ADSL 2+ modem on the R3002 supports Annex B (ADSL over ISDN),
which is predominantly used in Germany, as well as the international Annex A (ADSL over POTS)
and its extension Annex M making it suitable for use in many countries.
With its 19-inch metal housing and highly efficient internal switched-mode power supply the
gateway guarantees long-term reliability in critical corporate applications. This makes the R3002
ideal for use as a VPN gateway in SMEs and company head offices. The device has five Gigabit
Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a licence for ten
hardware-accelerated IPSec tunnels. Up to 100 additional IPSec tunnels can also be enabled if
licensed. The built-in ISDN BRI interface can be used as a remote configuration access and as an
ISDN backup interface.
gateway. The integrated ADSL 2+ modem on the R3002 supports Annex B (ADSL over ISDN),
which is predominantly used in Germany, as well as the international Annex A (ADSL over POTS)
and its extension Annex M making it suitable for use in many countries.
With its 19-inch metal housing and highly efficient internal switched-mode power supply the
gateway guarantees long-term reliability in critical corporate applications. This makes the R3002
ideal for use as a VPN gateway in SMEs and company head offices. The device has five Gigabit
Ethernet ports, which can be configured for LAN, WAN or DMZ, and comes with a licence for ten
hardware-accelerated IPSec tunnels. Up to 100 additional IPSec tunnels can also be enabled if
licensed. The built-in ISDN BRI interface can be used as a remote configuration access and as an
ISDN backup interface.
Using functions flexibly
Only a few functions are required to forward data between two networks. Bintec gateways have
features that go far beyond just routing and allow it to be seamlessly integrated into complex IT
infrastructures.
As routing protocols, you can use RIP, OSPF or the Multicast routing protocol PIM-SM for example,
and the comprehensive multicast support makes the device ideal for use in multimedia and
streaming applications.
Even the basic equipment of the bintec R3002 provides a SIP application level gateway (ALG) for
the direct connection of IP telephones in the network or for registering with a VoIP provider. The
ALG automatically controls the internal firewall making it easier to configure your VoIP solution.
Thanks to the integrated quality of service, you can prioritise VoIP traffic over normal internet
traffic, for example, and thereby always ensure sufficient bandwidth for your IP voice
connections. Alternatively you can give normal data traffic priority over e-mail traffic. The DNS
proxy function supports the LAN for address implementation and the automated IP configuration
of PCs is carried out over an integrated DHCP server.
Remote CAPI is available for the joint use of various ISDN services.
Only a few functions are required to forward data between two networks. Bintec gateways have
features that go far beyond just routing and allow it to be seamlessly integrated into complex IT
infrastructures.
As routing protocols, you can use RIP, OSPF or the Multicast routing protocol PIM-SM for example,
and the comprehensive multicast support makes the device ideal for use in multimedia and
streaming applications.
Even the basic equipment of the bintec R3002 provides a SIP application level gateway (ALG) for
the direct connection of IP telephones in the network or for registering with a VoIP provider. The
ALG automatically controls the internal firewall making it easier to configure your VoIP solution.
Thanks to the integrated quality of service, you can prioritise VoIP traffic over normal internet
traffic, for example, and thereby always ensure sufficient bandwidth for your IP voice
connections. Alternatively you can give normal data traffic priority over e-mail traffic. The DNS
proxy function supports the LAN for address implementation and the automated IP configuration
of PCs is carried out over an integrated DHCP server.
Remote CAPI is available for the joint use of various ISDN services.
Comprehensive IPSec implementation
The IPSec implementation integrated in bintec R3002 works not only with preshared keys but
also with certificates. This allows a public key infrastructure to be created for maximum security.
(The German Federal Office for Information Security also recommends the use of certificates.)
Furthermore, the bintec IPSec implementation offers support when creating VPN connections
with dynamic IP addresses: Even small branch offices can be reached without having to be
permanently online. If both VPN nodes only have dynamic IP addresses, confidential information
can continue. The exchange of IP addresses is carried out either over dynamic DNS providers or
directly over an ISDN connection. The actual dynamic IP address is transferred either free of
charge in the ISDN D-channel or, if this is not possible, in the B-channel (at cost).
By using IKE Config mode and the bintec IPSec multi user this offers the opportunity to create
and manage IPSec dial-in solutions for multiple clients with minimal expense and IKE X-Auth
(extended authentication) allows a connection to be secured with a one time password and thus
with the highest level of security.
The IPSec implementation integrated in bintec R3002 works not only with preshared keys but
also with certificates. This allows a public key infrastructure to be created for maximum security.
(The German Federal Office for Information Security also recommends the use of certificates.)
Furthermore, the bintec IPSec implementation offers support when creating VPN connections
with dynamic IP addresses: Even small branch offices can be reached without having to be
permanently online. If both VPN nodes only have dynamic IP addresses, confidential information
can continue. The exchange of IP addresses is carried out either over dynamic DNS providers or
directly over an ISDN connection. The actual dynamic IP address is transferred either free of
charge in the ISDN D-channel or, if this is not possible, in the B-channel (at cost).
By using IKE Config mode and the bintec IPSec multi user this offers the opportunity to create
and manage IPSec dial-in solutions for multiple clients with minimal expense and IKE X-Auth
(extended authentication) allows a connection to be secured with a one time password and thus
with the highest level of security.
Load Balancing/Redundancy
bintec R3002