Conteg RDF-48-80/80 Hoja De Datos
Sizes
Height: 27, 42, 45, 48U
•
Width: 800mm
•
Depth: 800, 1000, 1200mm (1200mm not
•
available for 27U)
Construction
Welded frame construction
•
1.5 & 2.0mm sheet steel
•
Load rating
500kg balanced load (for 27U 300kg only)
•
19" vertical extrusions
2 pairs of sliding 19
•
" vertical L-type extrusions
C-type extrusions optionally
•
IP rating
Standard IP40
•
Optionally IP54
•
IP20 when perforated or vented doors used
•
A/C ready - IP54 when A/C unit installed
•
Colors
Standard RAL 7035 and 9005
•
Optionally other colors
•
Front door
Tinted security glass door
•
Swivel handle lock -
•
DIN profile, universal
key 333, multipoint; optionally half profile
cylinder or combination lock single or
multipoint (other locks on request)
Door opening angle 180
•
°
Easy re-hanging to open on right or left
•
Optionally steel, vented, perforated, glass
•
with perforation, vertically divided door
Rear door
Sheet steel door
•
Swivel handle lock -
•
DIN profile, universal
key 333, multipoint; optionally half profile
cylinder or combination lock single or
multipoint (other locks on request)
Optionally can be replaced by full range of
•
front doors and panels
Side panels
Removable with locks
•
Top plate
Single-piece design, removable
•
4
• " (100mm) rounded cable entry in every
corner covered by plastic cap
300x100mm cable entries covered with
•
removable sheet steel blank panels
300x50mm cable entries covered with
•
removable sheet steel blank panels
420x280mm ventilation opening(s) covered
•
with removable sheet steel blank panel,
allow installation of 6-fan ventilation unit(s)
(800mm and 1200mm deep racks only)
420x440mm ventilation opening covered
•
with removable sheet steel blank panel, allow
installation of 9-fan ventilation unit (1000mm
deep racks only)
Bottom plate
Segmented design, removable
•
4
• " (100mm) rounded cable entry in every
corner covered by plastic caps
300x100mm cable entries covered with
•
removable sheets steel blank panels
Feet
Adjustable feet as standard; castors, lockable
•
castors, plinth or plinth with filter optionally
Adaptation
Possibility to adapt for installation of 21
•
"
equipment (on request - 800mm width only)
Adaptor DP-RE-01 needed (ordered separately)
Adaptor DP-RE-01 needed (ordered separately)
•
Other
Racks can be installed in blocks
•
by using DP-
DR-UNI (ordered separately)
A/C & cooling units compatible
•
GND/earthing kit included
•
DESCRIPTION
The RDF rack is designed as a cabling cabinet and is intended to be used in data centers, equipment
rooms and network or telecommunication closets. Moreover, RDF is fully compatible with all cooling
units from the Targeted Cooling portfolio and is already preconfigured to be used with top and wall mount
A/C units. The RDF’s flexible configuration options allow you to easily tailor the design to meet your exact
requirements for quantity, position and type of cable entry openings. The RDF comes with the full range of
doors, panels and locks and is designed to work with CONTEG’s air-flow optimization solutions. Advanced cabling
systems, High Density Wire Management and OptiWay, are ready to complete RDF’s installation and provide any
type of cabling with the best possible support and care.
COLOR SAMPLER:
RDF-42-80/80