HP DL380e G8 470065-794 Manual De Usuario
Los códigos de productos
470065-794
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped
separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard
drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8
Hard Drive Blank Kit.
NOTE: When the SAS-enabled riser board with the Smart Array B320i controller is installed in the server, the embedded Smart Array
B120i controller is automatically disabled. In the absence of another storage controller or an expander backplane, front drives operate
in AHCI or Legacy mode. In these two modes, the drives are not part of a hardware RAID or a member of a logical drive. The Locate,
Drive status, and Do not remove LEDs in the drive carrier are disabled.
Integrated Models" section.
NOTE: Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional options section
of this QuickSpecs.
NOTE: HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be shipped
separately.
NOTE: If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of this
QuickSpecs.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard
drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8
Hard Drive Blank Kit.
NOTE: When the SAS-enabled riser board with the Smart Array B320i controller is installed in the server, the embedded Smart Array
B120i controller is automatically disabled. In the absence of another storage controller or an expander backplane, front drives operate
in AHCI or Legacy mode. In these two modes, the drives are not part of a hardware RAID or a member of a logical drive. The Locate,
Drive status, and Do not remove LEDs in the drive carrier are disabled.
Entry Models - SATA
HP ProLiant DL380e Gen8
E5-2403 1P 4GB-R Hot
Plug 4 LFF 460W PS Entry
Server
648255-001
E5-2403 1P 4GB-R Hot
Plug 4 LFF 460W PS Entry
Server
648255-001
Processor(s)
(1) Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/6.4GT-s QPI/80W, DDR3-
1066, HT) Processor
1066, HT) Processor
Cache Memory
10MB (1x10MB) Level 3
Memory
4GB (1 x 4GB) Registered DIMMs PC3-10600R (1333MHz)
NOTE: Memory runs at 1066MHz speed due to processor.
Network Controller
HP Ethernet 1Gb 4-port 366i Adapter
Storage Controller
HP Dynamic Smart Array B120i Controller
NOTE: Provides support for up to 6 SATA drives and data transmission speeds
up to 3Gb/s Greater than 4 drives requires an additional cable (see p/n
675856-B21)
up to 3Gb/s Greater than 4 drives requires an additional cable (see p/n
675856-B21)
Hard Drive
None ship standard; includes 7 LFF hard drive blanks
NOTE: This model comes with 7 HDD blanks if no HDD is ordered.
Internal Storage
8 LFF HDD Bays
NOTE: This model comes with 8LFF Chassis.
Optical Drive Bay
1; (Optional: DVD-ROM, DVD-RW)
PCI-Express Slots
4 standard (1-FL/FH, 2-HL/FH, 1-LP)
Power Supply
(1) HP 460W CS Gold Hot Plug Power Supply (92% Efficient)
Fans
4 Hot-Plug Non-redundant Fans
NOTE: Customers can upgrade to a redundant fan configuration with the
purchase of an option kit (see p/n 667855-B21)
purchase of an option kit (see p/n 667855-B21)
Management
HP iLO Management Engine (standard)
Optional: HP Insight Control
Optional: HP Insight Control
Form Factor
Rack (2U)
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. To assist in the installation of
the server into the rack an optional installation tool is available by contacting
your local services representative (p/n 695539-001). Caution: HP recommends
that a minimum of two people are required for all Rack Server installations.
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. To assist in the installation of
the server into the rack an optional installation tool is available by contacting
your local services representative (p/n 695539-001). Caution: HP recommends
that a minimum of two people are required for all Rack Server installations.
QuickSpecs
HP ProLiant DL380e Generation 8 (Gen8)
Pre-configured Models
DA - 14328 North America — Version 22 — July 10, 2013
Page 19