Beyerdynamic 709190 Prospecto

beyerdynamic GmbH & Co. KG 
Theresienstr. 8 | 74072 Heilbronn – Germany
Tel. +49 (0) 71 31 / 617 - 0 | Fax +49 (0) 71 31 / 617 - 204
info@beyerdynamic.de | www.beyerdynamic.com

For further distributors worldwide, please go to www.beyerdynamic.com
Non-contractual illustrations. Contents subject to change without notice. E2/CUSTOM ONE GEAR (06.13)

2 of 2

This polar pattern and frequency response curve (± 3 dB) correspond to a typical production sample for this microphone.

• Remove the pop shield from the microphone.
• Connect the cable to the CUSTOM ONE PRO headphone.
• Connect the microphone to the jack socket of the cable and

adjust the microphone as shown in the illustration.  

• Please note that the slotted side is the rear of the microphone.

Make sure that it points away from the mouth. Refer to the arrow. 

• Put the pop shield over the microphone again.

Warning: 
In order to avoid overstretching and premature wear and tear never
bend the gooseneck more than 90°.

Rear of the microphone.