Massive Wall light 33081/48/10 330814810 Manual De Usuario

Los códigos de productos
330814810
Descargar
Página de 4
Technical section
Function:
• The electronic pulse switch is concealed in the luminaire and 
connects the main switch and the diff erent light sources. It reacts to 
the pulses given by the main switch. 
A
B
1
OFF
2
ON
ON
A
B
1
OFF
2
ON
A
B
OFF
OFF
A
B
B
ON
A
RESET
>10sec.
<10sec.
<10sec.
Dimming
When a luminaire is dimmed, the light output of its light source(s) 
is reduced. For luminaires, we diff erentiate between two types of 
dimmers:
• Integrated dimmer: some luminaires come with an integrated 
dimmer, which also functions as the operating switch. Depending on 
the type of dimmer, the light output can be adapted gradually or in 
steps. 
• External dimmer: most luminaires can be connected to an external 
dimmer. However, not all light sources can be dimmed and 
some require a specifi c type of dimmer. Check the compatibility 
specifi cations and the precautions before installing an external 
dimmer. If in doubt, consult a qualifi ed electrician. 
Light source
Dimmable?
Type of dimmer
Incadescent bulbs
Yes
with most dimmers
High Voltage 
Halogen bulbs
Yes
with most dimmers
Low Voltage 
Halogen bulbs
Yes, only if executed with 
electronic dimmable 
ballast
with most dimmers
CFL-i
Not in general, but 
dimmable versions exist in 
the market
dimmable bulbs can be 
used with specifi c dimmers
CFL-Ni
Yes, only if executed with 
electronic dimmable 
ballast
specifi c dimmer suitable 
for CFL-Ni dimming
LED bulbs
Not in general, but 
dimmable versions exist in 
the market
with specifi c dimmers
LED integrated
Yes, only if executed with 
electronic dimmable 
ballast
only with most trailing 
edge dimmers
4. Regulations, norms and marks
ENEC
02
ENEC is a high-quality European safety mark that can be 
awarded to a wide range of electrical appliances, including 
luminaires. Its main advantage is that it covers diff erent 
national regulations and norms, reducing the need for 
separate national marks. ENEC-approved luminaires are 
tested by an independent organisation in Europe. In the 
Massive range, all TOP SELECTION articles are ENEC-
approved.
CE
The CE marking or conformance mark is mandatory for 
luminaires distributed in Europe. Unlike ENEC, which is an 
offi
  cial mark awarded by an external organisation, the CE 
marking is the sole responsibility of the producer. By placing 
this marker on our products, Massive certifi es that our 
products meet the current safety, health and environmental 
requirements of the European Union.
EMC
EMC or ‘electromagnetic compatibility’ means that an appliance can’t 
have unwanted eff ects on another appliance and vice versa. Most 
EMC-sensitive articles work with remote control, contain ballast or 
are equipped with a motion sensor. All Massive luminaires that are 
subject to an EMC risk are severely tested before they are approved 
for production. 
Adjustable luminaires
Adjustable luminaires are strictly regulated, especially when it 
comes to temperature: the adjustable part has to stay below 60°C 
if it is made of metal; for other materials the temperature limit is 
75°C. To ensure the safety of our luminaires, Massive often adds an 
extra component (usually a pin) that makes it possible to adjust the 
direction of the light beam without touching the adjustable part itself. 
Naturally, all articles are severely tested before going into production.
Child appealing
A luminaire is considered to be child-appealing when it resembles a 
toy and youngsters can reach and move it. This means that a ceiling 
light shaped as a star does not fall in this category, while a table lamp 
resembling a star most defi nitely does. Child-appealing luminaires 
need to meet some very strict regulations:
• Class III is obligatory;
• Maximum 50V power-output in the luminaire itself;
• A child can touch the luminaire at any time, so the temperature has 
to stay very low;
• Temperature testing is conducted while the luminaire is covered by 
a blanket.