ZyXEL 660HW-D1 91-004-593001B Manual De Usuario

P-660H/HW-D Series User’s Guide

65

Chapter 3 Wizard Setup for Internet Access

The following table describes the labels in this screen.

3 Configure your wireless settings in this screen. Click Next.

Figure 29   Wireless LAN Setup Wizard 2

Table 13   Wireless LAN Setup Wizard 1

Active

Select the check box to turn on the wireless LAN. 

Enable OTIST

Select the check box to enable OTIST if you want to transfer your ZyXEL 

Device’s SSID and WPA-PSK security settings to wireless clients that support 

OTIST and are within transmission range.
You must also activate and start OTIST on the wireless client at the same time. 

The process takes three minutes to complete.

Note: Enable OTIST only if your wireless clients support WPA 

and OTIST.

Setup Key

Type an OTIST Setup Key of up to eight ASCII characters in length. Be sure to 

use the same OTIST Setup Key on the ZyXEL Device and wireless clients.

Back

Click Back to display the previous screen.

Next

Click Next to proceed to the next screen. 

Exit

Click Exit to close the wizard screen without saving.