Intel E7-2880 v2 CM8063601273306 Manual De Usuario
![Intel](https://files.manualsbrain.com/attachments/5a71b1e7f60391972dadeef20435931cbf4621a5/common/fit/150/50/86c99b5f14aeb2708e9a9e1b5305af4ccf882c1af0155dad25413c2ed84e/brand_logo.png)
Los códigos de productos
CM8063601273306
Integrated I/O (IIO) Configuration Registers
290
Intel
®
Xeon
®
Processor E7-2800/4800/8800 v2 Product Family
Datasheet Volume Two: Functional Description, February 2014
14.2.122 XPPMR[0:1]
XP PM Response Control
The PMR register controls operation of its associated counter, and provides overflow or
max compare status information.
max compare status information.
11:8
RW_V
0xf
high_nibble_pex_compare1_value:
High Nibble PEX Compare1 value
High order bits [35:32] of the 36-bit PM Compare1 register.
High order bits [35:32] of the 36-bit PM Compare1 register.
7:4
RV
-
Reserved.
3:0
RW_V
0xf
high_nibble_pex_compare0_value:
High Nibble PEX Compare0 value
High order bits [35:32] of the 36-bit PM Compare0 register.
High order bits [35:32] of the 36-bit PM Compare0 register.
Type:
CFG
PortID:
N/A
Bus:
0
Device:
0Function:0
Bus:
0
Device:
2Function:0
Bus:
0
Device:
3Function:0
Offset:
0x492
Bit
Attr
Default
Description
Type:
CFG
PortID:
N/A
Bus:
0
Device:
0Function:0
Bus:
0
Device:
2Function:0
Bus:
0
Device:
3Function:0
Offset:
0x494, 0x498
Bit
Attr
Default
Description
31:31
RV
-
Reserved
30:30
RW
0x0
not_greater_than_comparison:
Not greater than comparison
0: PMC will compare a greater than function. When clear the perfmon status
0: PMC will compare a greater than function. When clear the perfmon status
will assert when the PMD is greater than the PMC.
1: PMC will compare with NOT (greater than) function. When set the perfmon
1: PMC will compare with NOT (greater than) function. When set the perfmon
status will assert when the PMD is less than or equal to the PMC.
29:29
RW
0x0
force_pmd_counter_to_add_zero_to_input:
Force PMD counter to add zero to input
This feature is used with the queue measurement bus. When this bit is set the
This feature is used with the queue measurement bus. When this bit is set the
value on the queue measurement bus is added to zero so the result in PMD will
always reflect the value from the queue measurement bus.
0: Do not add zero. Normal PerfMon operation.
1: Add zero with input queue bus.
0: Do not add zero. Normal PerfMon operation.
1: Add zero with input queue bus.
28:28
RW
0x0
latched_count_enable_select:
Latched Count Enable Select
0: Normal PM operation. Use CENS as count enable.
1: Use Latched count enable from queue empty events
0: Normal PM operation. Use CENS as count enable.
1: Use Latched count enable from queue empty events
27:27
RW
0x0
reset_pulse_enable:
Reset Pulse Enable
Setting this bit will select a pulsed version of the reset signal source in the
Setting this bit will select a pulsed version of the reset signal source in the
reset block.
0: Normal reset signaling
1: Select a pulsed reset from the reset signal sources.
0: Normal reset signaling
1: Select a pulsed reset from the reset signal sources.