Philips PT861 PT861/41 Manual De Usuario

C

  Remove and clean one set of cutters and 

combs at a time.

 

C

  Separate the cutter from the comb and 

clean it with the brush supplied.

Do not clean more than one cutter and comb 

at a time, since they are all matching sets. If you 

accidentally interchange the cutters and combs, it 

could take several weeks before optimal shaving 

performance is restored.

C

  Clean the inside and outside of the comb 

with the brush supplied.

For optimum performance, razor cutters and 

combs should be cleaned in a degreasing liquid 

(e.g. Philips Norelco Shaving Head Cleaning Spray, 

Model HQ110 or alcohol) and lubricated with 

one drop of mineral oil (in the center of the 

head).  This helps prevent wear of the shaving 

heads.

C

  Replace the set back into the Razor Head 

Assembly.

C

  Make sure that the two pointy edges of the head

 

fit exactly into the recesses. 

 

 

20

  Repeat the process for the other two sets 

of cutters and combs.

  Replace the frame and turn the lock 

clockwise until it locks into place. 

C

  Insert the notch of the shaving unit into 

the slot in the top of the razor (1) and 

then close the shaving unit (2).  

NOTE: If the shaving unit does not close smoothly, 

make sure you inserted the shaving heads 

properly and that the retaining frame is locked. 

 

  Turn razor OFF.

C

 

  Push down spring-release trimmer switch. 

C

 

  Clean trimmer with the short-bristled side 

of the brush every time you use it.  

 

21