Cisco OC-12/STM-4 Pluggable Intermediate-Reach (15 km) Transceiver Module SFP-OC12-IR1= Hoja De Datos
Los códigos de productos
SFP-OC12-IR1=
Data Sheet
© 2008 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 6
Features
Descriptions
SONET errors, alarms, and
performance monitoring
performance monitoring
Synchronization:
●
Local (internal) or loop timed (recovered from network)
●
Pointer activity monitoring
●
Redundant clock source should be provisioned on different SPAs as only a single
timing source can be provided by SPA
Local (diagnostic) and line (network) loopback
Payload mapping
●
POS with 1 + X^43 self-synchronous scrambler
SONET/SDH compliance:
●
Telcordia (Bellcore) GR-253-CORE (as applicable)
●
ANSI T1.105, T1.231
●
ITU-T G.707, G.957, G.825 (as applicable)
Supported SONET/SDH alarm and signal events:
●
Signal failure bit error rate (SF-ber)
●
Signal degrade bit error rate (SD-ber)
●
Signal label payload construction (C2)
●
Path trace byte (J1)
●
Section
●
Loss of signal (LoS)
●
Loss of frame (LoF)
●
Error counts for B1
●
Threshold crossing alarms (TCA) for B1
●
Line
●
Line alarm indication signal (LAIS)
●
Line remote defect indication (LRDI)
●
Line remote error indication (LREI)
●
Error counts for B2
●
TCA for B2
●
Path
●
Path alarm indication signal (PAIS)
●
Path remote defect indication (PRDI)
●
Path remote error indication (PREI)
●
Error counts for B3
●
TCA for B3
●
Loss of pointer (LoP)
●
Positive stuffing event (PSE)
●
Negative stuffing event (NSE)
●
Path unequipped indication signal (PUNEQ)
●
Path payload mismatch indication signal (PPLM)
Network management
SONET-MIB (RFC 3592)
SONET/SDH-MIB (RFC 2558)
CISCO-SONET-MIB
DS-3/E3-MIB (RFC 3896)
DS-1/E1-MIB (RFC 2496)
Simple Network Management Protocol (SNMP)
Reliability and availability
Online insertion and removal (OIR)
Field-replaceable SFP optical modules
1+1 SONET Automatic Protection Switching (APS) and SDH Linear Multiplexer Section
Protection (MSP) protocols (please check platform support)
Protection (MSP) protocols (please check platform support)
Single SPA software reset
Physical specifications
Weight: 1.27 lb (0.57 kg)
Height: 1.56 in. (3.96 cm) (double height)
Width: 6.75 in. (17.15 cm)
Depth: 7.28 in. (18.49 cm)
Power
2-port channelized OC-12/STM-4 = 52.0W (with optics)