OKI MicroLine 590 Elite 00036103 Manual De Usuario
Los códigos de productos
00036103
To set the Top of Form with the FormTear-Off feature engaged, push and hold the SHIFT and
TEAR buttons (3) to see the current Top of Form setting. Then continue to hold the SHIFT
button, release the TEAR button and press the LF button (4) to move the paper down or the FF
button (5) to move the paper up to set the Top of Form.
TEAR buttons (3) to see the current Top of Form setting. Then continue to hold the SHIFT
button, release the TEAR button and press the LF button (4) to move the paper down or the FF
button (5) to move the paper up to set the Top of Form.
Note:
Some programs, such as high resolution graphics packages, pause occasionally while
sending data to the printer. If the pause lasts more than two seconds, the paper
sending data to the printer. If the pause lasts more than two seconds, the paper
advances
to the tear-off position until more data is received. No
data is lost, but this extra paper
movement can cause uneven print
registration in graphics. If you have this problem, enter
the printer Menu, go to
the Rear Feed group and change the setting for Form Tear-off to
Off. If you have
problems setting the Top of Form high enough on the page when using
Forms Tear-Off,
see Problem Solving in Chapter 6 ()
ML590/591 ( 96-02-07 )