ZyXEL 660HW-D1 91-004-593010B Manual De Usuario

P-660H/HW-D Series User’s Guide

Chapter 15 Remote Management Configuration

204

The following table describes the labels in this screen.

You can configure your ZyXEL Device for remote Telnet access as shown next. The 
administrator uses Telnet from a computer on a remote network to access the ZyXEL Device.

Figure 111   Telnet Configuration on a TCP/IP Network

Click Advanced > Remote MGMT > Telnet tab to display the screen as shown. 

Table 80   Remote Management: WWW

Port

You may change the server port number for a service if needed, however you must 

use the same port number in order to use that service for remote management.

Access Status

Select the interface(s) through which a computer may access the ZyXEL Device 

using this service.

Secured Client IP A secured client is a “trusted” computer that is allowed to communicate with the 

ZyXEL Device using this service. 
Select All to allow any computer to access the ZyXEL Device using this service.
Choose Selected to just allow the computer with the IP address that you specify to 

access the ZyXEL Device using this service.

Apply

Click Apply to save your settings back to the ZyXEL Device. 

Cancel

Click Cancel to begin configuring this screen afresh.