ZyXEL Router ADSL 660R-61C 91-004-498005B Manual De Usuario

Prestige 660R-6xC Series User’s Guide

37

Chapter 2 Introducing the Web Configurator

6 It is highly recommended you change the default password! Enter a new password, retype 

it to confirm and click Apply; alternatively click Ignore to proceed to the main menu if 
you do not want to change the password now.  

Figure 4   Change Password at Login

7 You should now see the SITE MAP screen.

If you forget your password or cannot access the web configurator, you will need to use the 
RESET button at the back of the Prestige to reload the factory-default configuration file. This 
means that you will lose all configurations that you had previously and the password will be 
reset to “1234”.

1 Make sure the PWR/SYS LED is on (not blinking).

2 Press the RESET button for ten seconds or until the PWR/SYS LED begins to blink and 

then release it. When the PWR/SYS LED begins to blink, the defaults have been restored 
and the Prestige restarts.

The following summarizes how to navigate the web configurator from the SITE MAP screen. 

Note: If you do not change the password, the following screen appears every 
time you log in.

Note: The Prestige automatically times out after five minutes of inactivity. 
Simply log back into the Prestige if this happens to you.