Bosch EVF-1181S EVF-1181S-BLK Manual De Usuario
Los códigos de productos
EVF-1181S-BLK
30
31
CONC
eR
t
IN
StA
LL
PO
RtA
BL
e P
A
CONC
eR
t
IN
St
AL
L
PO
Rt
AB
Le
P
A
LOU
DSP
eA
eA
Ke
RS
LOU
DSP
eA
Ke
RS
Delivering high performance in an ultra-compact
package, the S-40 is ideal for both distributed
and near-field applications requiring high-quality
sound. The two-way short-throw system is housed
in an optimally vented, high-impact polystyrene
enclosure that is suited for installation both
indoors and out. Lows are handled by a 5.25"
direct-radiating woofer with a polypropylene
cone, while the high-frequency section is a
1" direct-radiating soft-dome tweeter that is
ferrofluid cooled. built-in automatic power
limiting independently protects each driver from
unsafe transients. With mounting options that are
flexible enough for virtually any application, the
S-40 is perfect for anything from background
and foreground music in restaurants and clubs
to near-field monitoring in control rooms and
broadcast studios.
S-40
Frequency Response (+/- 3 dB)
85 Hz – 20 kHz
Sensitivity (SPL, 1 W @ 1 m)
85 dB
Max. SPL/1m (calc.)
113 dB
Power handling (Long-term, Short-term)
120 W, 480 W
Coverage, H x V
100° x 100°
Directivity Index
9.8 dB (+3.8/-3.6 dB), 2–20,000 Hz
LF Transducer
5.25"
HF Transducer
1" softdome
Crossover frequencies
3,500 Hz
Nominal impedance (low Z version)
4 Ω
Minimum impedance (low Z version)
3.7 Ω
Input connections
Spring terminal
Dimensions (H x W at front x D)
9.8" x 7" x 5.9" (249 x 178 x 150 mm)
Net Weight (including mounting bracket)
5.7 lb (2.6 kg)
our top-of-the-line floor monitors, originally designed as
part of the X-Array touring line.
• Two-way, high-output design
• Two-way, high-output design
• Vented LF enclosure
• Two symmetrical 55° enclosure angles
• Ultra compact for all-size stages
• Ultra compact for all-size stages
• 3" ND6-16 titanium/neodymium HF compression driver
• 80° x 55° Constant Directivity waveguide
• Neutrik Speakon paralleled pass-through
• 80° x 55° Constant Directivity waveguide
• Neutrik Speakon paralleled pass-through
connectors on each end
• Two integrated handles
This speaker remains one of our most popular
choices for speech reinforcement, for under-
balcony and on-wall locations in permanent
installations, and as a high-quality monitor
system. Dual 8" drivers in a tuned enclosure are
matched to a 1" titanium compression driver with a
100° x 100° Constant Directivity waveguide.
The FRi-2082 comes with a mounting bracket
for horizontal or vertical orientation, while the
FRi-28LPM has non-skid rubber mounting feet to
make it more appropriate for stage monitoring.
S-40
ULTRACoMPACT 5.25" TWo-WAy FULL-RANGE LoUDSPEAkER
• Ideal for both distributed and
near-field applications
• Designed for indoor and outdoor use
• Direct-radiating polypropylene-cone woofer
• 1" ferrofluid-cooled soft-dome tweeter
• High power-handling, ultra-linear
• Direct-radiating polypropylene-cone woofer
• 1" ferrofluid-cooled soft-dome tweeter
• High power-handling, ultra-linear
frequency response
• Vented trapezoidal enclosure of
high-impact polystyrene
• Passive crossover with power protection
for both woofer and tweeter
• Two omniMount-compatible
0.25" suspension points
Xw12A
Xw15A
Frequency Response (-3 dB)
65 Hz – 18 kHz
55 Hz – 18 kHz
Recommended High-Pass Frequency System controller determined System controller determined
Axial Sensitivity (SPL, 1 W @ 1 m),
Axial Sensitivity (SPL, 1 W @ 1 m),
LF/HF
98/110 dB
99/110 dB
Max. SPL @ 1 m (calc.), full space,
LF/HF
129/135 dB
133/135 dB
Long-Term Power Handling, LF/HF 300/75 W
600/75 W
Short-Term Power Handling (peak),
LF/HF
1200/300 W
2400/300 W
Coverage (nominal -6 dB) H° x V°
55° x 80°
(Const. Dir. waveguide)
55° x 80°
(Const. Dir. waveguide)
Directivity Index
11.6 dB (+2.3/-2.1 dB)
1,200–16,000 Hz
11.6 dB (+3.0/-3.6 dB)
1,200–16,000 Hz
LF woofer (transducer)
12" DL12ST
15" EVX155
HF throat diameter (transducer)
1.4" ND6-16
1.4" ND6-16
Crossover Frequencies
Factory preset
Factory preset
Nominal Impedance, LF/HF
8 Ω/16 Ω
8 Ω/16 Ω
Minimum Impedance, LF/HF
8.2 Ω/10.5 Ω
7.2 Ω/14.3 Ω
Input Connections
2 four-pin Speakon
2 four-pin Speakon
Dimensions in floor position
(H x W at front x D)
23" x 17.2" x 12.2"
(534 x 449 x 313 mm)
25.4" x 18" x 13.4"
(644 x 452 x 340 mm)
Net Weight
48 lb (21.9 kg)
62.5 lb (28.4 kg)
• DL12ST woofer with
Ring-Mode Decoupling
for vocal clarity
for vocal clarity
Xw12A
12" TWo-WAy FLooR MoNIToR
• EVX155 woofer with
4" voice coil
Xw15A
15" TWo-WAy FLooR MoNIToR
• Ultra-compact LF-optimized vented enclosure
• 1" HF driver on Constant Directivity waveguide
• 100° H x 100° V coverage pattern
• Low-profile slanted design
• 1" HF driver on Constant Directivity waveguide
• 100° H x 100° V coverage pattern
• Low-profile slanted design
• Versatile 45° aiming angle for under-balcony,
on-wall and stage monitoring applications
• Mounting bracket included (FRi-2082 only)
• Two 3/8" suspension points
• Two 3/8" suspension points
FRi-2082
FRi-28LPM
DUAL 8" TWo-WAy FULL-RANGE LoUDSPEAkER
FRi-2082 & FRi-28LPM
Frequency Response (- 3dB)
70 Hz – 20 kHz
Frequency Range (-10 dB)
55 Hz – 16 kHz
Recommended High-Pass Frequency
50 Hz (12 dB/octave)
Axial Sensitivity, Biamp (SPL, 1 W @ 1 m)
93 dB
Max. SPL /1 m (calc.), full space
122 dB
Power Handling, Biamp (Continuous, Peak)
200 W, 800 W
Coverage (nominal -6 dB) H x V
100° x 100° (Const. Dir. waveguide)
LF Transducer
Two 8"
HF Transducer
1" compression driver
Crossover Frequency
2,800 Hz
Nominal Impedance (Biamp)
8 Ω
Input Connections
Barrier strip
Dimensions (H x W at front x D)
8.75" x 24.5" x 14" (222 x 620 x 356 mm)
Net Weight
40 lb (18.2 kg)
TX1152FM
15" TWo-WAy FULL-RANGE MoNIToR
• Ultra low-distortion SMX2151
woofer with fully symmetric drive
• 100 db sensitivity, 133
db maximum SPL
TX1122FM
12" TWo-WAy FULL-RANGE MoNIToR
• Low-distortion SMX2121 woofer
with fully symmetric drive
• 99 db sensitivity, 132
db maximum SPL
TX1122FM
TX1152FM
Speaker Type
Full-range
Full-range
Frequency Response (-3 dB)
70 Hz – 20 kHz
65 Hz – 20 kHz
Frequency Range (-10 dB)
55 Hz – 20 kHz
45 Hz – 20 kHz
Sensitivity (SPL, 1 W/1 m)
99 d B (1w/1m)
100 dB
Max. SPL/1m (calc)
132 dB
133 dB
System Power Handling
(Continuous, Peak)
500 W, 2000 W
500 W, 2000 W
Coverage(Nominal -6 dB)
90° H x 50° V
90° H x 50° V
LF Transducer
12" SMX2121
15" SMX2151
HF Transducer
1.25" DH3/2010A
1.25" DH3/2010A
Internal Crossover
Yes
Yes
Crossover Frequency
1,600 Hz
1,750 Hz
Nominal Impedance (Passive)
8 Ω
8 Ω
Minimum Impedance
6.4 Ω
6.2 Ω
Input Connections
Parallel Neutrik NL4
Parallel Neutrik NL4
Enclosure Material
Plywood and MDF with
EVCoat
Plywood and MDF with
EVCoat
Flying Suspension
Six 3/8" threaded inserts
Six 3/8" threaded inserts
Dimensions (H x W x D)
17.3" x 14.3" x 22.6"
(440 x 364 x 573 mm)
18.7" x 17.3" x 25.8"
(475 x 439 x 655 mm)
Net Weight
43.7 lb (19.8 kg)
51.9 lb (23.5 kg)
tOUR X FLOOR mONItORS
CONCeRt mONItORS
• Compact with high output
• Ideal for small-to-medium stages
• Signal Synchronized Transducers™ for woofer/tweeter alignment
• 1.25" DH3/2010A titanium HF compression driver
• Ideal for small-to-medium stages
• Signal Synchronized Transducers™ for woofer/tweeter alignment
• 1.25" DH3/2010A titanium HF compression driver
• 90° H x 50° V Constant Directivity waveguide
• Integrated 24 db/octave crossover with HF protection
• Power handling: 500 W continuous, 2000 W peak
• black EVCoat finish
• Integrated 24 db/octave crossover with HF protection
• Power handling: 500 W continuous, 2000 W peak
• black EVCoat finish
See page 50 for S-40 and page 47 for FRi-2082 Rigging and Accessories.
See page 40 for Tour X Loudspeakers.