Canon Color Image Scanner 0013B001 Manual De Usuario
Los códigos de productos
0013B001
Specifications
21
English
Specifications
*1
16 bit output supported for film scanning only.
*2
The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included.
*3
Calibration processing time is not included.
*4
35 mm slides not supported.
• Note that Macintosh computers with USB 2.0 Hi-Speed interface expansion cards are not supported.
• Specifications are subject to change without notice.
Optional Accessory Kit
• You can purchase the following Accessory.
Accessory Kit CSAK-LiDE 500F : film guide, cap for film adapter unit
Upgrading to USB 2.0 (Windows Only)
To upgrade a computer to the USB 2.0 standard, please use one the following USB expansion cards/hubs
that have been verified by Canon for compatibility.
Expansion Cards
Hubs
• Adaptec USB2connect 5100
• PCI bus Adaptec XHUB4
• Adaptec USB2connect 3100LP
• PCI bus Adaptec XHUB4PLUS
• Adaptec USB2connect 2000LP
• PCI bus Adaptec XHUB7PLUS
• Adaptec DuoConnect: PCI bus
For installation procedures, please read the instructions that accompany the USB expansion card/hub.
Scanner Type
Flatbed
Scanning Element
CIS (Color Contact Image Sensor)
Light Source
3-color (RGB) LED
Optical Resolution
2400 x 4800 dpi
Selectable Resolution
25 - 19200 dpi (ScanGear CS)
Scanning Bit Depth
Color
16 bit input/16 bit or 8 bit output for each color (RGB)
Grayscale
16 bit input/16 bit or 8 bit output
*1
Scanning Speed
*2
(Photo or Document)
Color
10.38 msec./line (1200 dpi), 20.7 msec./line (2400 dpi)
Grayscale, B&W
4.98 msec./line (1200 dpi), 6.9 msec./line (2400 dpi)
Scanning Speed
*2
(Film)
5.16 - 82.56 msec/line
Preview Speed
*3
Approximately 9 sec.
Interface
USB 2.0 Hi-Speed/USB (USB 1.1 equivalent)
Maximum Document Size
A4/Letter: 216 x 297 mm
Film Type/Number of Frames
35 mm strip (negative/positive)
*4
/ 1 frame
Scanner Buttons
4 buttons: COPY, SCAN, PDF, E-MAIL
Operating Range
Temperature
5
°
C to 35
°
C (41
°
F to 95
°
F)
Humidity
10% to 90% RH, 20% to 80% RH when scanning film
(without condensation formation)
Power Requirements
Supplied via USB port (No external adapter required)
Power Consumption In operation: 2.5 watts maximum, Stand-by: 1.4 watts
Maximum Exterior Dimensions
Maximum Exterior Dimensions
280 x 396.5 x 34.9 mm
Weight
Approximately 2.0 kg
• After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according
to the steps on page 4.