Black Box TE164A-R2 Manual De Usuario
BLACK BOX
®
2 of 3
09/13/2011
#11701
»
Connect central office voice signals to distant
“Plain Old Telephone” (POTS) equipment
over fiber cables while using standard
telephone signaling.
over fiber cables while using standard
telephone signaling.
»
Support both FXS (connects to PBX)
and FXO (connects to phone device).
»
Digitize voice calls and send data at greater
distances without degradation. Plus no
amplification required.
amplification required.
»
Ideal for areas with high interference.
»
Choose from multimode or single-mode
fiber operations.
»
Include audio transmission, Caller ID,
and automatic ringdown.
»
Lifetime warranty.
Features
Sure, a lot of folks are moving to VoIP systems these days. But the
fact is, many businesses still rely on an old analog phone system with
a central PBX for trunking and switching voice calls. And what if you
want to route calls from your proprietary
circuit-switched system over secure, crystal-clear fiber cabling at
farther distances? Then you need POTS 2-Wire to Fiber Converters.
a central PBX for trunking and switching voice calls. And what if you
want to route calls from your proprietary
circuit-switched system over secure, crystal-clear fiber cabling at
farther distances? Then you need POTS 2-Wire to Fiber Converters.
OVERVIEW
Set up high-quality voice links without having to upgrade to
a campus-wide, IP-based PBX system with IP phones connected
to a network. They do this by inexpensively connecting basic analog
phone services from 2-wire FXS copper lines to optical wiring. Easily
link Central Office devices to distant POTS equipment while gaining
all the advantages and bandwidth of fiber! They’re particularly
great for areas where ground loops and EMI/RFI interference
may be a problem.
to a network. They do this by inexpensively connecting basic analog
phone services from 2-wire FXS copper lines to optical wiring. Easily
link Central Office devices to distant POTS equipment while gaining
all the advantages and bandwidth of fiber! They’re particularly
great for areas where ground loops and EMI/RFI interference
may be a problem.
NOTE: Must be used in pairs.
Phone
Central Office
or PBX
POTS 2-Wire to
Fiber Converter
(TE160A)
POTS 2-Wire to
Fiber Converter
(TE161A)
Premium Ceramic, Multimode, 62.5-Micron
Fiber Optic Cable (EFN110-STST)
RJ-11 Cable
RJ-11 Cable
Phone
Phone
POTS 2-Wire to Fiber
Converter
(TE163A-R2)
POTS 2-Wire to
Fiber Converter
(TE163A-R2)
Premium Ceramic, Multimode, 62.5-Micron
Fiber Optic Cable (EFN110-STST)
RJ-11 Cable
RJ-11 Cable
Link your standard analog phone system’s Central Office or PBX to an analog phone, or link two analog
phones together, over fiber cable.