Philips Micro music system DCB2070 DCB2070/79 Manual De Usuario
Los códigos de productos
DCB2070/79
15
EN
6 Listen to FM
radio
Tune to FM radio stations
Note
•
Position the antenna as far as possible from TV, VCR, or
other radiation source.
•
Make sure that you have connected and fully extended
the supplied FM antenna.
1
Press FM to select FM tuner mode.
2
Press and hold / for 3 seconds.
»
[Scanning] (scanning) is displayed.
»
The unit tunes to an FM station with
strong reception automatically.
3
Repeat step 2 to tune to more stations.
To tune to a station with weak signal:
Press / repeatedly until you find optimal
reception.
Store FM radio stations
automatically
Note
•
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold MODE/
SCAN for 3 seconds.
»
The unit stores all the FM radio stations
automatically and then broadcasts the first
preset radio station.
Store FM radio stations
manually
1
1
In tuner mode, tune to an FM radio station.
2
Press PROG to activate programming
mode.
»
[PROG] (program) blinks.
3
Press / repeatedly to select a channel
number.
4
Press PROG again to confirm.
5
Repeat steps 1-4 to store other FM
stations.
Note
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio station
In tuner mode, press / or the numeric
buttons to select a preset number.
Select stereo/mono broadcast
Note
•
Stereo broadcast is the default setting for tuner mode.
•
For stations with weak signals: to improve the reception,
change to monaural sound.
In FM tuner mode, press OK to switch between
mono and stereo broadcast.