Seagate ST1000LM015 Manual De Usuario
S
EAGATE
L
APTOP
SSHD SATA P
RODUCT
M
ANUAL
, R
EV
. C
8
D
RIVE
S
PECIFICATIONS
2.7.1.1
Typical current profiles
Figure 1 Typical 5V Startup and Operation Current Profile
2.7.2
Conducted noise
Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line.
Using 5-volt power, the drive is expected to operate with a maximum of
100 mV peak-to-peak square-wave injected noise at up to 10
MHz.
N
OTE
Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.
2.7.3
Voltage tolerance
Voltage tolerance (including noise):
+5V ± 5%