Philips Slim Smart Full HD LED TV 48PFS6609 48PFS6609/12 Manual De Usuario

2 - Select 

TV settings > Ambilight > Advanced > Wall colour.

3 - Select the colour sample that matches the colour of the wall
behind the TV and press 

OK.

4 - Press 

, repeatedly if necessary, to close the menu.

TV switch off

With 

TV switch off, you can set Ambilight to switch off

immediately or slowly fade out when you switch off the TV. The
slow fade out gives you some time to switch on the lights in
your living room.

To select the TV switch off . . .

1 - Press 

 and select Setup and press OK.

2 - Select 

TV settings > Ambilight > Advanced > TV switch

off.
3 - Select 

Fade out to off or Immediate switch off.

4 - Press 

, repeatedly if necessary, to close the menu.

Lounge light mood

When the TV is on standby, you can switch Ambilight on and
create a Lounge light effect in your room.

To switch Ambilight on while the TV is on standby, press 



 (Ambilight).

To change the Lounge light colour range, press 



 (Ambilight) again.
To switch off Lounge light, press and hold 

 (Ambilight) for a

few seconds.

You can also set up the colour range in the TV settings menu.

1 - Switch on the TV (out of the Lounge light mode).
2 - Press 

 and select Setup and press OK.

3 - Select 

TV settings > Ambilight > Advanced > Lounge light

mood and press OK.
4 - Select the colour range you prefer.
5 - Press 

, repeatedly if necessary, to close the menu.

Lounge light+hue

If you installed Ambilight+hue, you can let the hue bulbs follow
Lounge light from Ambilight. The Philips hue lamps will expand
the Loung light effect across the room. The hue bulbs are
switched on and automatically set to follow Lounge light when
you configure Ambilight+hue.

To switch the hue bulbs on or off…

1 - Press 

 and select Setup and press OK.

2 - Select 

TV settings > Ambilight > Advanced > Lounge

light+hue.
3 - Select 

On or Off.

4 - Press 

, repeatedly if necessary, to close the menu. 

 

23.5

Universal access

Switch on

With 

Universal access switched on, the TV is set for use for

hearing and visually impaired people.

Switch on

 

 

If you did not switch on 

Universal access during the installation,

you can still switch it on in 

Setup.

To switch on Universal access . . .

1 - Press 

 and select Setup and press OK.

2 - Select 

TV settings > General settings > Universal access

and press 

OK.

3 - Select 

On and press OK.

4 - Press 

, repeatedly if necessary, to close the menu. 

With Universal access switched on in Setup, the Universal access
option is added in the Options menu.

Hearing impaired

Switch on

Digital TV channels can broadcast special audio commentary
describing what is happening on screen.
To be able to set the visually impaired audio and effects, you
have to switch on 

Audio description first.

Also, before you can switch on Audio description, you have to
switch on 

Universal access.

Audio description

 

 

With Audio description, a narrator's commentary is added to
the normal audio.
To switch on the commentary (if available) . . .

1 - With 

Universal access switched on, press 



 OPTIONS and select the Options tab in the menu bar.
2 - Select 

Audio description and press OK.

3 - Select 

On and press OK. 

You can check if an audio commentary is available.
In the Options menu, select 

Audio language and look for an

audio language marked with a 

.

Speakers / Headphones

With 

Speakers / Headphones, you can select where you want

to hear the audio commentary.
On the TV speakers only, on the headphones only or on both.

To set Speakers / Headphones . . .

1 - Press 

 and select Setup and press OK.

2 - Select 

Channel settings > Languages > Audio description >

83